911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Please add Porsche parts and anything you wish to sell here (no commercial sales)

Moderator: Bootsy

Post Reply
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

I have set of new Wossner (Wössner) pistons for 2.0 liter 911 engine, these are non-S versions so comp ratio app. 9.0:1.
These are oversize pistons so you'll need to bore 80mm Birals to 81mm. I decided to go different route and bought new Mahle cylinders and pistons so these are extra for me. These are available from various vendors, e.g. Design911 (code K9102).

Part Number: K9102 (actually K9102D100)
Dim: 80.94mm , clearance 0.06mm
Rings: 810XDS-3 Pin:WP017 Clip: CW22 (just copied what is says in the box :D )

Set is new and unused, and still in the box. EDIt: New price including shipping to UK is 550£ (Paypal ok, I paid quite a bit more... )
Pics below in (hopefully) last post.

/Ville
Last edited by Project 911 on Sat Feb 01, 2020 5:49 am, edited 2 times in total.
Ville

*************
1967 911 resto-project
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

Still for sale

Also happy to px for good original SWB front bumper, or 911R (gf) rear bumper assembly or other gf body parts. And probably to many other parts as well, cheaper or more expensive.
Ville

*************
1967 911 resto-project
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

Still for sale.
Pretty rough Birals can be used as diameter is 1mm more. :)
Ville

*************
1967 911 resto-project
stretch
Me and DDK sitting in a tree! KISSING
Posts: 2688
Joined: Thu May 21, 2009 2:54 pm
Location: Kent

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by stretch »

Surprised these haven't sold yet Ville. They would have worked for me, but i have decided to sell my SWB project :(

Got them flares on yet. :)

Dave
70T barn find...... to ST.
1998 C2 996 Kettle
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

stretch wrote:Surprised these haven't sold yet Ville. They would have worked for me, but i have decided to sell my SWB project :(

Got them flares on yet. :)

Dave
Flares will have to wait until my 67' resto is closer to finish (they'll go to 66' hotrod), next stage is finally paint. But flares are perfect, thanks!! :)

I believe these Wössner's would be fairly economical way and look/feel completely stock when using old Birals. My 67' project have taken so many years that plans have changed too many times, thus these un-used parts for decent discount vs what I paid. :D (not unique story I believe :D )
Ville

*************
1967 911 resto-project
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

Still for sale
Ville

*************
1967 911 resto-project
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

And still have these, new price 680£
Ville

*************
1967 911 resto-project
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

One more try (before possible customs etc fun from EU...), 660£ shipped
Ville

*************
1967 911 resto-project
Project 911
DDK above all
Posts: 165
Joined: Mon Apr 07, 2008 5:57 pm
Location: Finland

Re: 911 (65-68) Wossner 81mm piston set for 2.0 engine, new

Post by Project 911 »

It seems I like to hold these forever, price is 550£ including shipping to UK. Edited also initial post.
Attachments
IMG_3638.JPG
IMG_3637.JPG
IMG_3634.JPG
Ville

*************
1967 911 resto-project
Post Reply