So today has been fun if not a little messy!
![Image](https://s20.postimg.org/qohbppxn1/P1020773.jpg)
Time to get cracking on getting this underseal off. Not the most fun of jobs
![Confused :?](./images/smilies/icon_confused.gif)
![Image](https://s20.postimg.org/cof9xkvwt/P1020774.jpg)
![Image](https://s20.postimg.org/hkni30lfx/P1020783.jpg)
![Image](https://s20.postimg.org/450hdkcy5/P1020784.jpg)
![Image](https://s20.postimg.org/m93hy7aml/P1020785.jpg)
![Image](https://s20.postimg.org/ay0u9u3rh/P1020786.jpg)
So run out of steam now and thought i'd knock off early!
Here are a few pictures of bits that have been going on in the background.
![Image](https://s20.postimg.org/632jxtg25/P1020771.jpg)
![Image](https://s20.postimg.org/tmeajf5al/P1020772.jpg)
I've powdercoated the tank from black to the grey to match the filler (ish)
Next is what i'm pretty pleased with. After spending some time figuring out the suspension and finding someone to make it....
I first uprated the bushings in the top mounts. Then powdercoated them along with anodising the hardware.
![Image](https://s20.postimg.org/orkll56z1/P1020769.jpg)
The rears.
![Image](https://s20.postimg.org/5sv1eh1fx/P1020770.jpg)
Then the front struts. Converted to coil over with longer top hats, helper springs and lower bearings to help stearing.
![Image](https://s20.postimg.org/g47e74t59/P1020775.jpg)
![Image](https://s20.postimg.org/y4l6p9aq5/P1020777.jpg)
![Image](https://s20.postimg.org/f9pfyuaod/P1020778.jpg)
![Image](https://s20.postimg.org/6spxnx5zh/P1020779.jpg)
Then the rears.
![Image](https://s20.postimg.org/n11kjnpfx/P1020780.jpg)
![Image](https://s20.postimg.org/tl8y3qsul/P1020782.jpg)
I am adding to this set up both front and rear anti roll bars which will require some body mods and a fare bit of welding. Hopefully it should all work
So off for a early bath and a curry!