Hi, I need a new oil breather hose (24mm ID) from my oil tank to the engine for my 914-6. I need about 900mm because of the routing, unfortunately 911 ones at standard 650mm are too short!
Can anyone help with a UK supplier for these hoses who can sell by the metre?
I tried Patrick Motorsport in USA. 1m of hose was $35 dollars- shipping was $111!
Many thanks
24mm ID Oil Tank Breather hose- supplier needed
Moderators: hot66, impmad2000, Nige
24mm ID Oil Tank Breather hose- supplier needed
Porsche 914-6 (2.4E on Webers)
-
- Put a fork in me, I'm done!
- Posts: 1717
- Joined: Sat Aug 05, 2006 7:02 pm
- Location: Rochford, Essex
Re: 24mm ID Oil Tank Breather hose- supplier needed
This any good Rob?
PET says the length is 800mm.
https://www.rosepassion.com/en/cat/pors ... ose/P77876
PET says the length is 800mm.
https://www.rosepassion.com/en/cat/pors ... ose/P77876
-
- Me and DDK sitting in a tree! KISSING
- Posts: 2697
- Joined: Thu May 21, 2009 2:54 pm
- Location: Kent
Re: 24mm ID Oil Tank Breather hose- supplier needed
These guy's sell the Porsche cohline hoses in various sizes.
http://www.advancedfluidsolutions.co.uk ... -218-c.asp
http://www.advancedfluidsolutions.co.uk ... -218-c.asp
70T barn find...... to ST.
1998 C2 996 Kettle
1998 C2 996 Kettle
Re: 24mm ID Oil Tank Breather hose- supplier needed
many thanks, for the fast response, very much appreciated
Porsche 914-6 (2.4E on Webers)
- KS
- Nurse, I think I need some assistance
- Posts: 14997
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: 24mm ID Oil Tank Breather hose- supplier needed
I went to my local motor factor who had 24mm ID heater hose on a roll. Does the job perfectly (the hose is under no pressure) and not expensive.