Next Project
Moderator: Bootsy
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
Cheers guys.
No orders Olly. Maybe not to everyone's taste but mine . Need to get them finished now ready for the NEC.
No orders Olly. Maybe not to everyone's taste but mine . Need to get them finished now ready for the NEC.
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Next Project
Morning Rich,
Really neat and well executed solution to the rain ingress problem, as Olly pointed out probably the best option that would be on the market, maybe a punt on eBay would generate some interest. Provides an all year round drivable option.
One of the reasons I went for the hardtop is to provide the option to drive all year round and never considered using a soft top. My original concerns regarding the soft top hood was condensation forming on the inside and dripping all over the interior. I had the same problem with my Wizard-Roadster years ago. Always seemed to be raining!
Your solution provides a solution to both hard top and soft top use, I have always wanted to drive my replica more regularly than my 356A Coupe. The value on the Coupe just means I am very careful where I drive, which means its stuck in the garage most of the time.
Really neat and well executed solution to the rain ingress problem, as Olly pointed out probably the best option that would be on the market, maybe a punt on eBay would generate some interest. Provides an all year round drivable option.
One of the reasons I went for the hardtop is to provide the option to drive all year round and never considered using a soft top. My original concerns regarding the soft top hood was condensation forming on the inside and dripping all over the interior. I had the same problem with my Wizard-Roadster years ago. Always seemed to be raining!
Your solution provides a solution to both hard top and soft top use, I have always wanted to drive my replica more regularly than my 356A Coupe. The value on the Coupe just means I am very careful where I drive, which means its stuck in the garage most of the time.
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
To be honest not pushed this to sell. Was merely finding a solution to a problem l wasn't happy with. Could have my arm twisted though
Funny cos the first thing the Ddk guys asked me on the first pit-stop (cafe in the woods) on the wet Thursday morning was "how wet am l" dry my reply.
Even the Tonneau cover did me proud. Had this fitted on the Saturday when parked up all day. We had some rain in the afternoon but we had a real heavy shower in the evening. I was expecting the car to be flooded in the front floor wells when l got back. It was parked on a incline facing down, to my surprise it was dry in the cockpit area.
Funny cos the first thing the Ddk guys asked me on the first pit-stop (cafe in the woods) on the wet Thursday morning was "how wet am l" dry my reply.
Even the Tonneau cover did me proud. Had this fitted on the Saturday when parked up all day. We had some rain in the afternoon but we had a real heavy shower in the evening. I was expecting the car to be flooded in the front floor wells when l got back. It was parked on a incline facing down, to my surprise it was dry in the cockpit area.
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Next Project
Hi Rich,
Looks like I am first in-line to twist your arm! Seriously I am interested as it would start to tick another item off the list. Let me know what you think
Looks like I am first in-line to twist your arm! Seriously I am interested as it would start to tick another item off the list. Let me know what you think
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
I'm sure something could be sorted. Take it you want wind-up Windows to use with a soft-top as well as your hard-top?
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
Not much activity on here so thought I'd put this up.
So with the winter on it way, the roof is up so needed to find a place to store the tonneau cover until the better weather. With an extra hour this morning as the clocks went back, got the trusty old sewer out and made a custom fit bag to store it. Had a Porsche badge knocking round the garage for the passed how many years?, so put it to good use.
So with the winter on it way, the roof is up so needed to find a place to store the tonneau cover until the better weather. With an extra hour this morning as the clocks went back, got the trusty old sewer out and made a custom fit bag to store it. Had a Porsche badge knocking round the garage for the passed how many years?, so put it to good use.
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
-
- Nurse, I think I need some assistance
- Posts: 8804
- Joined: Sat Apr 23, 2005 9:08 pm
- Location: Nottingham, UK
Re: Next Project
Smart - obviously got too much time on your hands - you need a few more kids
The simple things you see are all complicated
I look pretty young but I'm just backdated yeah
I look pretty young but I'm just backdated yeah
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
Thinking of having a few more, has I've to much time
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
- Bootsy
- Site admin and the Boss
- Posts: 23981
- Joined: Sat Nov 08, 2003 6:09 pm
- Location: Norwich
- Contact:
Re: Next Project
A word of advice.
Plenty of practice making them but limit your success.
Plenty of practice making them but limit your success.
1972 911T | 1994 993 Carrera | 1999 986 Boxster | 1990 T25 Camper
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
Don't worry Boosty I've capped it at 5.
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
Update on the posts I'd started awhile back.
After figuring out how l was going to finish the inside aswell as the top of the posts. This is what I've decided on, here's a picture of the inside, top and outside of the posts back from the welder.
Just need to do some carefull grinding etc now. Not sure on how to finish them yet, polish up or a fine sand finish (Matt).
After figuring out how l was going to finish the inside aswell as the top of the posts. This is what I've decided on, here's a picture of the inside, top and outside of the posts back from the welder.
Just need to do some carefull grinding etc now. Not sure on how to finish them yet, polish up or a fine sand finish (Matt).
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Next Project
Looking good. Have you thought of a silver anodise? The finish is hard wearing, weather resistant and should look very period, without being bright chrome.
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
Re: Next Project
Great work again Sir Rich think am gonna have to put windows in mine one day keep up the good work
-
- Put a fork in me, I'm done!
- Posts: 1512
- Joined: Thu Sep 28, 2006 8:23 pm
- Location: midlands u.k
Re: Next Project
Greg I'll look into Anodising. If it hardens to ally in the process, think I'll go that way as the ally is soft and easily scuffs/marks.
Thanks Sir Olly
This afternoon was spent grinding the welds down and sanding the ally through the grades. Really happy with how the top has come out.
Thanks Sir Olly
This afternoon was spent grinding the welds down and sanding the ally through the grades. Really happy with how the top has come out.
Rich
DDK Member 0547
Evolving Speedster Build
DDK Member 0547
Evolving Speedster Build
Re: Next Project
Morning Rich, awesome ali section, top is particularly sweet!
The replacement window guys use anodise on ali all the time which certainly gives a hard wearing surface. Not sure if there is any work hardening of the ali section.
The replacement window guys use anodise on ali all the time which certainly gives a hard wearing surface. Not sure if there is any work hardening of the ali section.
1963 Karmann Ghia
1959 356A Coupe Outlaw
1957 3.2 Speedster replica
1959 356A Coupe Outlaw
1957 3.2 Speedster replica