I am building a 356 Speedster replica and have just got it back from having the body bonded so it's time to start fitting it out with all lights and trim pieces etc. While I've got quite a few bits already I'm short of the following and before I go trawling the interweb was wondering if anyone out there has some that they are willing to part with:
- Front White Beehive Indicators (need pretty quickly)
- Dash Switches
- Headlights
- Fog Light
- Wipers
- Inner door handles both the one for opening and the one for pulling closed
- Bosch Horns
To help me with rebuilding a set of Dellorto 40s I'm also on the hunt for the Dellorto Superperformance Tech manual.
Alternatively, any leads/recommendation as to where I may find these would be welcome.
Thanks in adavance.
356 Replica Build Parts
Moderator: Miggs
Re: 356 Replica Build Parts
Have a set o f 3 gauges if required
Re: 356 Replica Build Parts
got a pair of pre 67 sloping headlights here if needed ......new, and maybe a wiper setup.....
Left over from my speedster build
Left over from my speedster build
Re: 356 Replica Build Parts
Very grateful for your replies gents. I have a set of gauges, a wiper mechanism and headlights thanks. I think the formatting went a bit strange as I'm after the switches for each the headlights, wipers and fog light please.
Really really need a pair of front indicators if anyone has a set?
Thanks again.
Really really need a pair of front indicators if anyone has a set?
Thanks again.