1974 Carrera Coupe - RHD, UK car

[Cortina]

I've run them on the 928 (in competition) - tried two set ups - 185/70 *15 all round , and with 215/70's on the back.
Both sets ups were fine ... I just could not justify the cost of the wider tyres (lasting circa 100 competitive miles !!) ... even with the improved traction ... cough.

[Ferry Man]

Will you track it Paul?

Yes, I'm sure that will happen. It's a Porsche 911, it should be capable of a bit of fast driving (as long as I keep on the tarmac).

[Ferry Man]

I hope to pop down to Nick's early next week, I need to deliver him an engine & gearbox.

I did deliver a valuable cargo down to Early911. There was an empty engine compartment that needed filling soon.

The Carrera's rebuilt engine & gearbox had been stored at my place of work but it was now time to dust the pallet down and set off to Sussex.

[Ferry Man]

I'd forgotten just how good the engine & gearbox looked.
It'll be a treat bolting them in.

[Ferry Man]

[Ferry Man]

A lot of the historic racers run those tyres I think, 911's to GT40.

I've run them on the 928 (in competition) - tried two set ups - 185/70 *15 all round , and with 215/70's on the back.
Both sets ups were fine ....

Thanks for the feedback guys, I'm certain they'll be great tyres.

[Ferry Man]

the tyres I’ve selected (to be fitted – in my case – on ‘sevens & eights’).

I'm sure I have said this before (probably about a hundred pages back by now) but my car had the original Fuchs wheels with it and they were 6" on the front and 7" on the rear.
But I'm 'upgrading' to 7's & 8's so I purchased a pair of 8" rims from Nick.
They will be detailed to match the sevens (which will become my 'fronts').

[Ferry Man]

And a few more detail shots of the continuing re-assembly work:

[Ferry Man]

[Ferry Man]

[Ferry Man]

[hot66]

is the pump the original recon'd or one of the new ones available from Porsche ?

[Cortina]

Hope you put the bolts in the "right" way round (so they can be removed without gearbox removal) ? ... here is where someone tells me there was a mod done so on this year of car it does not matter !! ??

... in which case disregard above !

Ohps , I see in earlier photo ... so that's a yes

[Ferry Man]

Hope you put the bolts in the "right" way round (so they can be removed without gearbox removal)?

Yes, Nick's wise to that. In fact it's normally him that cautions others of the correct way to install.

[Ferry Man]

is the pump the original recon'd or one of the new ones available from Porsche ?

It's a new Porsche pump. I managed to find the last OPC with one in stock (Colchester) and snapped it up.