FS:911/914 parts - DO NOT REPLY TO THIS THREAD

[amallagh]

Following item added to the original list:-
6x15" Fuchs wheels w/o tyres. Profressionally restored a couple of years ago including reanodising and painting but hardly used since. Set of 4. Excellent condition. £1295.

Following items sold and removed from original list
901 engine mounting bar. Has just been professionally stripped and powder coated and not use since. £62
1965 lower aluminium 6 stud valve covers (as std with fin cut outs for twin plug but not drilled for twin plug) £89

[amallagh]

Following items now sold and removed from original list -
902/01 complete 4 speed early aluminium case gearbox ('65-'68). Checked internals and all looks OK but not seen working so can't directly vouch for condition. Ideal for SWB 911 or 912. Serial No.1080642.
Maxsport RB4 175/70R15. 2 off New tyres. Std soft motorsport compound (as wide as the 185/70 Dunlops). £80 for pair. (50% off new price)
911/912 matching pair of front torsion bars. Good condition 19mm diameter. £110

[amallagh]

Following item now sold and removed from original list -
911 Rev Counter dated 1969. One of the mounting screws is cut short but still OK. Part No.90174130203. £90

[Steve C]

Hi,

I would like to purchase the 914 heater duct parts. Please could you give me total price including postage. I could arrange payment by PayPal or bank transfer. Please send PM with details.

Thanks

Steve

P.S. - Still considering the heat exchangers, but still saving for them!!!

[amallagh]

No problem Steve, I'll PM you

[amallagh]

Following item added to the 1st post list with picture for sale -
912 Gearbox cross member for early 4 or 5 speed car ('65-'68 I think). Really excellent overall condition but would would benefit from a basic repaint. £27

Following item now sold and removed from original list :-
914 heater ducting parts. One duct needs a good clean and the other one could do with a rub down and paint but otherwise fairly sound. Just £10 for everything in the picture.

[amallagh]

Following items added to original list for sale:-
911 Mann metal airbox and trumpet inlet. Nice condition with no damage, serious dents or corrosion inside or out. Very presentable as is or could be painted to make perfect. £225
911 pair of Weber carb buckets with good clips. Nice condition with no damage, serious dents or corrosion. £145

Following items now sold and removed from the original list :-
6x15" Fuchs original matching wheel set w/o tyres. All dated 2.72. Part No 911.361.020.00. Profressionally restored a couple of years ago including reanodising and painting but hardly used since. Set of 4. Fantastic set of wheels in lovely condition. See full high resolution detailed pictures of each wheel showing all inside and outside surfaces. The pictures speak for themselves with respect to the condition. £1495.

901 early style magnesium fan housing. 901.106.101.5R £84

901 early style magnesium fan housing. Has just been professionally stripped and powder coated and not used since. 901.106.101.5R £99

Porsche 914 Koni SPORT gas top adjustable rear shock absorbers (8241 1050SPORT). Bought as contingency in case my existing ones were not back in time after being rebuilt for a motorsport event. New in unopened boxes fresh from Holland ! Brilliant shocks. >33% off retail price £299

[amallagh]

Various later Porsche brake parts to clear - (I know ! I'll advertise them elsewhere as well) -
EBC Red Stuff Ceramic high performance pad sets X2 (DP3612C). Fitted to a 3.3Turbo(F&R), bedded in but then not used so both sets are like new. Fits 3.3 Turbo(F&R), 964 F&R, 993 Rears & various 928, 968 & 944. See full apploication list below
http://www.ebcbrakeshop.co.uk/default.p ... ch=DP3612C
£55 for 1 set or £100 for both.
Porterfield AP30 R-4 brand new pad set. As for rear fitment on late 356, all SWB 911, early LWB 911 (M-caliper), all 914-4, all 912 . See link for exact details.
http://www.porterfield-brakes.com/keySearch.php
Can't find better pads imho. £77
Porterfield AP345 R-4 brand new pad set. Same fitment as EBC Reds above. Can't find better pads imho. £69
Porterfield AP372 R-4 brand new pad set. Various 993 F&R, 964Turbo&RS front, 944 Turbo, 968 Sport. See link below for detailed applications.
http://www.porterfield-brakes.com/keySearch.php
Can't find better pads imho. £89
993 n/s Brembo rear caliper. Genuine new part. Part No 993.352.421.00 £199
Sachs Race Engineering clutch friction plate. "RSR" style Rigid Hub w/Metallic Puck Disc (915 spline for '72-'86 cars) Sachs Part No. 881864999972. Been used on one cut short event but still OK to use. RRP £280. Yours for £25 !


914 passenger seat sold pending collection/payment.

[amallagh]

Following items now sold and removed from original list:-
Porterfield AP345 R-4 brand new pad set. Same fitment as EBC Reds above. Can't find better pads imho. £69
Porterfield AP372 R-4 brand new pad set. Various 993 F&R, 964Turbo&RS front, 944 Turbo, 968 Sport. See link below for detailed applications.
http://www.porterfield-brakes.com/keySearch.php
Can't find better pads imho. £89
Sachs Race Engineering clutch friction plate. "RSR" style Rigid Hub w/Metallic Puck Disc (915 spline for '72-'86 cars) Sachs Part No. 881864999972. Been used on one cut short event but still OK to use. RRP £280. Yours for £25 !

[amallagh]

Following item now sold and removed from the original list -
914 basketweave passenger seat - concourse condition - £149


The 2 EBC Red pad sets, Porterfield AP30 R4 pad set and last pair of Weber throttle return springs provisionally sold subject to receiving payment.

[amallagh]

Following items now sold and removed froom the original list
EBC Red Stuff Ceramic high performance pad sets X2 (DP3612C). Fitted to a 3.3Turbo(F&R), bedded in but then not used so both sets are like new. Fits 3.3 Turbo(F&R), 964 F&R, 993 Rears & various 928, 968 & 944. See full apploication list below
http://www.ebcbrakeshop.co.uk/default.p ... ch=DP3612C
£55 for 1 set or £100 for both.
911 weber throttle return springs (original part no. 901.108.631.00 NLA) as fitted to each carb between tab on top of carb body and hole in quadrant on end of throttle spindle. Slightly stiffer action than std, just as you want for our old carbs. Also have just the right very short tail & tight radius hook ends so they don't interfere with the throttle end stop on the quadrant as it rotates with the throttle shaft. £4.75 each.


Following item added to original list with picture for sale :-
964 KW stainless steel body, Variant 3, compression & rebound adjustable front strut set. Very little use indeed and in as new condition. £299 for pair. (>£1600RRP for car full kit)

[amallagh]

Following items added to the original list with photos :-
Early 911 lightweight high torque starter. Only 2.75kg. Came on a gearbox I bought. Cosmetically in good condition and tested working OK. £69
Post 1970 911 3 piece right side hot air socket. NLA Part Nos. 911.106.327.0(hot air socket), 911.106.036.00(cover plate) & 911.106.827.00(closing plate) £89
993 n/s Brembo rear caliper. Genuine new part. Part No 993.352.421.00 £199

Following item sold and removed from the original list :-
Porterfield AP30 R-4 brand new pad set. As for rear fitment on late 356, all SWB 911, early LWB 911 (M-caliper), all 914-4, all 912 . See link for exact details.
http://www.porterfield-brakes.com/keySearch.php
Can't find better pads imho. £77

[amallagh]

Following parts added to original post list:-
5.5X15 Fuchs wheels. Part No. 901.361.012.04. Been professionally refurbished at some point and hae proper anodised finish and good black paint on front face. No kerb marks at all. Top quality 185/70 Avon CR6ZZ tyres (3-4mm tread). Picture of 3 wheels below. All in matching similar condition. 2 dated 5/69 and one dated 5/68. Very rare wheels '68/'69 only. Visually just like 'Deep Sixes' with hearts. £335 each or £900 for 3.

Following provisionally sold :-
Early 911 Cambridge Motorsport lightweight high torque starter. Only 2.75kg. Came on a gearbox I bought. Cosmetically in good condition and tested working OK. £69

[amallagh]

Following item added to original list :-
Set of Dunlop SP82 rally tyres 195/70R15. 2 off M75 (soft) compound for the driven wheels and 2 off M6 (medium) compound for the front. Previously fitted to wheels but not in competition and then stored properly for a couple of years. Tread depth basically as new (circa 11-12mm). Ideal for 6" or 7" rims. They cost £160 each new. Set of 4 for £295.

[amallagh]

Following parts added -
914 laminated genuine UK made Pilkington front screen. Brand new in packaging. £165 (Lot less than I paid for it)
914 door glazing set in natural green glass look Perspex (4 pieces saves >4.5kg high up in the car and required under MSA rules for all stage rallying). Cut and thermo-moulded to exactly match the original double curvature glass shapes and can be used with original window winders/mountings. Main door glass fits lever style '73-'76 winders/mountings. £220 for full brand new 4 piece set. (comes with manufactures protective film on each piece)