2.4T Sporto - but see how it turns out.....

964RS · Post by **964RS** » Wed Apr 21, 2010 4:22 pm

Was going to ask if you actually used the Harnesses from me as need some for my new little purchase....but see they are in this car I think!

Nick Moss · Post by **Nick Moss** » Wed Apr 21, 2010 5:54 pm

Nick,you don't happen to supply ht lead holders for fixing leads over fan housing etc.
Thanks in advance,

Have you tried Porsche? The are listed as £3.37 each: 901 609 591 00

Was going to ask if you actually used the Harnesses from me

Yes, they scrubbed up well!

MikeB · Post by **MikeB** » Wed Apr 21, 2010 7:23 pm

Nick

I notice the rally stickers/plates are being applied "dry", which can often lead to wrinkles / bubbles. In the Lancia I alway took a "Fairy" bottle of soapy water with me, and fired it over the area you were going to stick the rally plate on. I'm sure you know the process, ensures a perfect fit every time

Would like to see pics of the sump guard mounts, just to see what you had to do to get them fitted.

brembo · Post by **brembo** » Wed Apr 21, 2010 8:14 pm

Thanks Nick,is the part number the same for large and small holders,it's the same ones you have on the ST engine I'm looking for.
Regards,

Nick Moss · Post by **Nick Moss** » Thu Apr 22, 2010 8:37 am

I notice the rally stickers/plates are being applied "dry",

Mike, hiding behind the roll of blue paper on the roof you will see the tp of my "squirt" bottle

it's the same ones you have on the ST engine I'm looking for

Dougie, those are RSR cable holders, I have them in stock at £60 a set

brembo · Post by **brembo** » Thu Apr 22, 2010 9:37 am

Cheers Nick, is the set 4 large and 6 small,if so I'll take a set. Can you pm me payment details.
Thanks again,

Nick Moss · Post by **Nick Moss** » Fri Apr 23, 2010 4:50 pm

MikeB · Post by **MikeB** » Fri Apr 23, 2010 5:49 pm

Glad to see you're taking every chance to save a bit of rubber, Nick

Any burn marks on the rear guards?

Keep her lit

left4dead · Post by **left4dead** » Fri Apr 23, 2010 5:53 pm

Looking great, Nick

Squatting down nicely on the exit with what looks like very little clearance on that rear arch?

Where d'ya finish then?

Oh, and did Waldegård have a go

Nick Moss · Post by **Nick Moss** » Fri Apr 23, 2010 6:26 pm

Any burn marks on the rear guards?

Currently running without AR bars and yes there is a minor mark on the LHS arch, despite them being rolled. I have 235/50 tyres on 9" rims. I will now try 15mm bars front and rear, I don't want the roll too stiff as I like to feel the car moving.

Where d'ya finish then?

It's not a competition, honestly! We retired after 3 stages. I'll let Bjorn have a go later in the year

911hillclimber · Post by **911hillclimber** » Fri Apr 23, 2010 7:11 pm

Great to see an attack attitude!
Certainly interesting comment about the roll bars. Food for thought.

Drive it like you stole it.

Mike · Post by **Mike** » Tue May 04, 2010 11:01 am

Nick, what black finish is that on the exhaust box, have you had it specially coated or is it just VHT paint?
Sorry to here about the trailer theft by the way.

Nick Moss · Post by **Nick Moss** » Tue May 04, 2010 11:11 am

Whatever paint Dansk put on has all burnt off now

. The engine will be out this week to change the cams so maybe I will get the box recoated.

Mike · Post by **Mike** » Tue May 04, 2010 12:37 pm

Had the headers ceramic coated inside and out by Cam-Coat in Warrington, but be interested to know what you put on the box.

kitesurfer2 · Post by **kitesurfer2** » Thu May 06, 2010 6:12 pm

Great effort from a great Porsche stalwart. Well done Nick, try not to bend it too much!

DDK - Die Deutschen Klassiker

2.4T Sporto - but see how it turns out.....

71 sporto