46 webers or PMO's

[911-356 dave]

Hi ,
Looking to buy pair of 46 webers for a 3.2 cerrera/RSR project or a second hand set of PMO's also need manifolds and linkages.
Cheers Dave

[911hillclimber]

When buying the PMO's if that is where you end up, be sure you get the right inlet manifolds.
There are 2 types, one for engines with Carbs originally on and one for 'mechelec' engines, ie the 3.2.

The mechelec has additional material on the head/manifold side to cover the injector cut-out. You will need the insulator kit too for that version.

Richard Parr at PMO is very good on customer service as you can now see!
I have just bought a pair for my 40 webers, but they were the carb engine ones though I have a 3.2.

I've fixed the problem now.

Hope this helps, and good luck with the search.

Graham.

[911-356 dave]

Thanks Graham for the reply. Dave