911 2.7RS

For classic Porsche 911 content

Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin

Post Reply
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

veryporky wrote:Daytona, RS, Dino, whatever European exotica you want to quote - they all look damned cheap compared to the $2m plus that the yanks are paying for premium muscle cars these days. Those things are tuned up lorries basically....

It's all relative as they say :bom: :bom:
Thanks for this Veryporky,

It's heartening to note that our price escalation is perhaps not as bad as was first thought, and that others are having it worse.

And, after paying through the nose, you've got 8 mpg consumption to deal with at our prices :shock:

A guy I know has a huge Buick (Regal?) and I'm sure that you could fit Paul's Smart car in the boot!


Steve. :)
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

Hi all,

Sorry the thread's been quiet, I've been hauled into sorting out some family problems that have taken longer than first thought.

We have also had to contend with another hitch in our (ongoing) moving saga. :roll:

Please don't think that my search has ended or abated, I am currently waiting for responses about two cars. I also enquired about the Blutorange RSR at PSAuto, but when I rang it had sold....... :roll:

Watch this space, more news soon,


Steve. :)
Paul64
DDK above all
Posts: 154
Joined: Sat Jul 07, 2007 12:27 pm
Location: Irby, Wirral / South of France

Post by Paul64 »

Hi Steve,
I had a 440 Chrysler in a Jensen Interceptor back in the 80's - never before has some much petrol gone through an engine in such a short time... I seem to remember 7mpg average around town, 10 on a run. Great engine note though!

It does make you wonder on the prices being paid for '60s/'70s cars over there - that auction house show from Nevada makes very interesting viewing.
I have a friend down in Australia who mentioned that cars he could buy for AUS$5000 when he was an apprentice are now clearing 500k!

If you are still up around the Wirral week beginning 14th April, drop me a line - I'll be there till the following weekend.

Regards,

Paul
1972 Carrera RS 2.7 (0024)
1992 MB 500E (It's a Porsche!!)
2007 Smart Fortwo CDI
IanMcLeod
DDK rules my life!
Posts: 1345
Joined: Fri Jan 14, 2005 8:33 pm
Location: Cornwall

Post by IanMcLeod »

Chap over the road from me has an old Land Rover fitted with a Chevy 5.7 engine. It's insane including the petrol consumption :-o

Ian.
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

Quick ten minutes here; so I'm going to ask a question that's been nagging me about Rs's.......

OK: Tyres

I'm guessing that to steer away from the period high-profile tyres would adversely affect the delicate set-up and handling of the RS? That the sidewall flexion would be kind of 'built-in' to the car? (I did search, so a thread pointy would be fine, but I couldn't find anything directly about the RS)

So: Which manufacturers actually make tyres for the RS? Are they just general tyres, or are there types that are actually good? Is it worth the manufacturers while to make good compounds for so (relatively) few cars, that let's be honest, do not do high miles, even average miles?

Do I have to accept that part of the 70's car experience is 70's level grip too?

Cheers,


Steve. :)
Roadrunner
Married to the DDK
Posts: 275
Joined: Wed Dec 10, 2003 5:56 pm
Location: London
Contact:

Post by Roadrunner »

Spydermon wrote:Hi all,

Sorry the thread's been quiet, I've been hauled into sorting out some family problems that have taken longer than first thought.

We have also had to contend with another hitch in our (ongoing) moving saga. :roll:

Please don't think that my search has ended or abated, I am currently waiting for responses about two cars. I also enquired about the Blutorange RSR at PSAuto, but when I rang it had sold....... :roll:

Watch this space, more news soon,


Steve. :)
Just out of interest, what are the two cars you're waiting for a response on ?
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

Roadrunner wrote:
Spydermon wrote:Hi all,

Sorry the thread's been quiet, I've been hauled into sorting out some family problems that have taken longer than first thought.

We have also had to contend with another hitch in our (ongoing) moving saga. :roll:

Please don't think that my search has ended or abated, I am currently waiting for responses about two cars. I also enquired about the Blutorange RSR at PSAuto, but when I rang it had sold....... :roll:

Watch this space, more news soon,


Steve. :)
Just out of interest, what are the two cars you're waiting for a response on ?
Hi Tim,

If you want me to tell you I'll have to PM you, both vendors have asked me not to say anything on the forum, which is something I'm getting quite a lot of now.


Steve. :)
Lightweight_911
Nurse, I think I need some assistance
Posts: 18003
Joined: Wed Nov 12, 2003 10:48 pm
Location: Worcs/W Mids border

Post by Lightweight_911 »

This thread on the Early 911S Registry should give you most of the information you need:


http://www.early911sregistry.org/forum/ ... hp?t=14836
Andy

“Adding power makes you faster on the straights;
- subtracting weight makes you faster everywhere”
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

Lightweight_911 wrote:This thread on the Early 911S Registry should give you most of the information you need:


http://www.early911sregistry.org/forum/ ... hp?t=14836
Brilliant Andy!

Just what I wanted to know, going to read it now, I'll join up too!



Cheers,


Steve. :)
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

I found this quoted on the thread above that Andy pointed me to, I have quoted it here for reference purposes. Wow, never realised it was such a minefield....but I'm suitably straightened out now. :wink:

/Quote

Eion Sloan - RS tyre article for Porsche Post - PCGB

--------------------------------------------------------------------------------

Porsche Post

Tyres
A month or so ago we looked at seats and harnesses – the things that secure the driver to the car. This month we are taking a look at tyres – the black things at each corner that secure the car to the road.

Background
The 2.7RS was one of the first production cars to be fitted with different sized wheels and tyres, front to rear. At this time, low profile tyres were still in their infancy and the choice of sizes were very limited. The standard configuration was:
1 Front - 6x15 Fuch wheels with 185/70VR15 tyres
2 Rear - 7x15 Fuch wheels with 215/60VR15 tyres
Although different in size, these tyres were of identical diameter and rolling radius.
The vast majority of RS’s left the factory with Dunlop SP Sports, although Pirelli CN36 were fitted to a small percentage of cars. 7”&8” Fuchs rims, when they were homologated later in 1973, were a popular upgrade and these were the widest rims allowed with the original tyre sizes. They provided a slightly flatter ‘footprint’ a slightly wider track and significantly stiffened the sidewalls to give sharper handling.

Spacesaver Spare
Obviously, different size wheels and tyres and, for non-UK cars, the larger 85 litre plastic fuel tank, presented a dilemma regarding the spare. This was resolved only by TUV (the German department of Transport) road homologating an innovative, deflated ‘spacesaver’ spare which was legal for sizes including those of the RS. for the two sizes in, with a compressor. The space saver came either as a 5.5x15 steel or 6x15 forged alloy Fuchs type. Generally the former with its compressor was supplied to Tourings (M472) and the latter with a rechargeable air bottle to Sport (M471). UK-spec cars had to comply with the 1922 Fuel Act(!) and retained the standard 65 litre steel fuel tank and fully-inflated spare.

Developments
Tyre technology moved swiftly and, in 1974 the 911 3.0 Turbo could be had fitted with the newly developed, and lower profile, Pirelli P7 (front – 205/55VR15; rear – 225/50VR15) as a DM 850 optional extra. These tyres could be fitted to the RS, although better suited to 7s&8s, but the lower aspect ratios reduced the overall diameter, which affected gearing and required a recalibrated speedo. Also, the tyres did not fill the arches quite so convincingly, unless the suspension was lowered. This and maintenance of the rolling radius was addressed in the Turbo by going to 16" wheels in 1977. Later series RS’s were fitted with shorter rear suspension trailing arms to homologate them for the 2.8 RSR. This allowed the wider, flatter race car tyres to retain better contact with the road surface and was only really appropriate for the racing width tyres..

Developments have continued apace with wheel sizes increasing and tyre profiles decreasing. Porsche continued to specify 15” wheels (6s&7s) for base 911s and 944s, with the original size tyres, until the mid-1980s. However, over the last 20 years, these tyre sizes have been progressively phased out and there is now a fairly limited choice. The biggest difficulty is finding matching sets, front to rear, in terms of size, brand, speed rating, loading etc.

Tyres obviously play a crucial role in the performance of any car and the latest technology should enhance the steering, braking, lateral adhesion, stability and comfort of the RS even further. Remember that current rubber, even in the original sizes, is almost certainly able to out-perform the 1973 product by a considerable margin in all respects. This includes adhesion, durability and aquaplaning resistance. So, don’t forget that today’s tyres on the original sizes will put significantly higher mechanical loading on your 30 year-old suspension and chassis, especially when on the track. Low profile tyres may not be necessary! In fact you may find that these are so sticky that you may be in danger of loosing a lot of the fun of driving the RS as it was meant to be driven. That is one reason the rounder-shouldered BF Goodrich Comp-TA’s were the ‘demon’ racers’ tyre in the ‘80’s, especially in the wet.

Ultimately, safety has to be the primary consideration, so, if your tread levels are low (less than 4mm) or the tyres are more than 10 years old, perhaps now is the time to consider a change. I have recently explored the options available and listed below are some of the available choices.

Road Tyres
Only Fulda is currently able to supply the original standard sizes in matched sets but the tread pattern is definitely not “period”. (Fulda ‘special order’ code is: 503 153 for the fronts and 502 713 for the rears). The rears remain available in 215/60s from other manufacturers, but the only alternative fronts are now 195/65s. These have a slightly wider footprint and stiffer sidewall, improving front-end grip and steering responses and reducing understeer. There appear to be only two choices from mainstream manufacturers – Pirelli P6000 (N1) or Good Year Eagle NCT5. I run the Pirellis on my 6s&7s and I have just fitted the Good Years to my 7s&8s so, in the future, I should be able to provide some comparisons. Initial impressions favour the Good Years

There is a wider choice in the lower profile 205/55 and 225/50 sizes. These include Michelin Pilot Exalto, Bridgestone SO3, Dunlop SP9000, Good Year F1, plus some other less well-known brands.

Race & Road Legal Track Tyres
If you want a period race tyre, Vintage Tyre Supplies at Beaulieu still do the traditional early ‘70s Dunlop Racing tyres. These would look terrific, but they are cross ply and not covered by the EEC road homologation.
The no longer available Pirelli P-Zero Cs used to be very popular. The Michelin Pilot Sport Cup (205/50 and 225/50) seems to have superseded them. Dunlop Motorsport also offer the D01J in these sizes, or more interestingly, the D84J in 225/55 and 205/60, which would provide a wider footprint whilst still closely matching the correct rolling radius. The D84J has an attractive traditional tread pattern and sidewall featuring the emotive Dunlop-R logo.

Mixing Tyres
Aside from the legal requirements, it is highly inadvisable to mix different tyre makes on the same axle. Most people would also prefer to retain matched tyres front to rear. However, for those in the know, particularly for competition use, there are circumstances where it is necessary to achieve particular characteristics from one end of the car by using different tyres. So, if you know what you are doing, fine. But, for most of us, the engineers designed the car to have matching pairs.

Set Up
Obviously, if you are investing in a new set of tyres it pays to have a full 4-wheel geometry check by an accredited specialist with an intimate understanding of the RS. I had mine done by JZ Machtech and they recommended fitting a Weltmeister strut brace. This contributes to the torsional stiffness at the front of the car, however, it is not acceptable under Appendix K historic regulations.

Porsche originally recommended tyre pressures of 2.0 bar (front and rear), but revised the rears to 2.4 bar in May 1973. Most owners will use these as a guide and experiment to find their preferred settings.

The above is purely intended as an informative guide. Tyre performance is very subjective, but getting the right tyres on a well set-up car can transform the performance, safety and enjoyment. As a final note do not be tempted to run on the road or track on tyres over seven years old. "Original" tyres may look nice for concours - in use they may seriously damage your health and wealth...

------------------------------------------------------------------
I went to Pirelli P6000 a year back and enjoy their handling characteristic's , they roll somewhat more than the low profiles I had on for years. Would love to get hold of some DUNLOP R's though......

I use LES TRONZO - PERFORMANCE TIRES - WILMINGTON DE - HE ATTENDS HERSHEY EVERY YEAR.....
__________________
Nick D

Early S Reg #403

1973 RHD 911 Carrera RS #0358
1955 356 Speedster #80784
2006 Cayenne S

/endquote.

If you've seen it before apols, but it seems to fit here too.

Cheers,

Steve. :)
Roadrunner
Married to the DDK
Posts: 275
Joined: Wed Dec 10, 2003 5:56 pm
Location: London
Contact:

Post by Roadrunner »

Spydermon wrote:
Roadrunner wrote:
Spydermon wrote:Hi all,

Sorry the thread's been quiet, I've been hauled into sorting out some family problems that have taken longer than first thought.

We have also had to contend with another hitch in our (ongoing) moving saga. :roll:

Please don't think that my search has ended or abated, I am currently waiting for responses about two cars. I also enquired about the Blutorange RSR at PSAuto, but when I rang it had sold....... :roll:

Watch this space, more news soon,


Steve. :)
Just out of interest, what are the two cars you're waiting for a response on ?
Hi Tim,

If you want me to tell you I'll have to PM you, both vendors have asked me not to say anything on the forum, which is something I'm getting quite a lot of now.


Steve. :)
Feel free to PM me, I'd be interested to know.
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

ROADRUNNER said: Feel free to PM me, I'd be interested to know.


DONE. :)
Paul64
DDK above all
Posts: 154
Joined: Sat Jul 07, 2007 12:27 pm
Location: Irby, Wirral / South of France

Post by Paul64 »

Hi Steve,

Any news???

Paul
1972 Carrera RS 2.7 (0024)
1992 MB 500E (It's a Porsche!!)
2007 Smart Fortwo CDI
Spydermon
Married to the DDK
Posts: 299
Joined: Thu Jan 10, 2008 12:24 pm
Location: Lancashire.

Post by Spydermon »

Paul64 wrote:Hi Steve,

Any news???

Paul
Hi Paul,

Sorry for the tardy reply, but I am still in a mire of family stuff, and dealing with a monster commute.....but hey-ho!

There are a couple of great cars in the frame, and I am considering them, one has already been mentioned on here and the other is the one I can't say anything about but have alluded to; but I have also heard of a few others that are coming through soon. SO, I'm watching and waiting a little. :roll:

BTW 964RS; did you hear any more about that great RS that you know about?

Have you picked up yours yet Paul?

I will try to make more time to keep this thread up to date soon.... :oops:


Cheers,


Steve. :)
Paul64
DDK above all
Posts: 154
Joined: Sat Jul 07, 2007 12:27 pm
Location: Irby, Wirral / South of France

Post by Paul64 »

Hi Steve,

No, not had a chance to collect the new toy yet - morning of the 12th is set as the day. Frustrating!
I added a thread to the Resto forum regarding the black RS (number 0789) at Freisinger's - it's on the website now in progress. It doesn't look in as poor condition as mine was intially so I guess the job won't take as long if you wanted to wait till after the summer....???


Paul
1972 Carrera RS 2.7 (0024)
1992 MB 500E (It's a Porsche!!)
2007 Smart Fortwo CDI
Post Reply