DDK - Die Deutschen Klassiker

Advice needed re tuning Solex carbs on my 912.No matter how much I try to weaken them I still have sooty plugs.
Can anyone recommend a reputable tuner in the Southampton area?
Bill

Thanks everybody for your help, Eurocarb have come up with the goods.

Hi, can anyone tell me where I can buy jets for Solex 40P11-4 carbs on my 912. I need 120 mains and 57.5 idlesThanks in anticipation.

Keith, how about a special edition of Porsche Classic with the whole story from beginning to end?

Hi, Does anyone have spare Idle jets size 57.5 and Main jets size 120 to fit Solex-40-P11-4 carbs as fitted to 1966 912 or lead me to a source of same. Mine were increased by a tuner but I feel she is running a bit rich, and would like to try going back to original sized jets.
Thanks.
Bill

you have pm

Are pre 1974 manufactured vehicles classified as historic vehicles, and therefore zero rated for car tax? My 1966 car seems to be first reg in 1983 according to DVLA and is thus not "historic" I cant believe it sat in a showroom for 17 years. I am awaiting a reply from DVLA Anyone got any ...

Hi, has anyone got a sender unit (901 741 801 00) to fit a 66 912?
One teminal does not appear to connect to anything inside the sender. Alternatively does anyone have a picture or diagram of the inside of the sender. Thanks in anticipation. Bill.

I need a couple of disc brake "expanding springs" Porsche part No 901 351 916 11 to fit 1966 912. They look like a cross shape of springy steel. Anyone help or got any ideas?

you have pm

just to let you know I had the wrong boots. The new ones fitted without problem.
thanks for your help.
Bill

Hi Gavin, yes the Outer gearselector boot seems identical to the drive shaft cv joint boot. The ? Inner one has an oval "mouth" . Just can't see where they should locate, ie behind the Gear selector UJ or ahead of it and covering the UJ. Seems impossibly tight, or are the pre 1974 boots la...

Hi Gavin, yes the Outer gearselector boot seems identical to the drive shaft cv joint boot. The ? Inner one has an oval "mouth" . Just can't see where they should locate, ie behind the Gear selector UJ or ahead of it and covering the UJ. Seems impossibly tight, or are the pre 1974 boots la...

Hi Gavin, yes the Outer gearselector boot seems identical to the drive shaft cv joint boot. The ? Inner one has an oval "mouth" . Just can't see where they should locate, ie behind the Gear selector UJ or ahead of it and covering the UJ. Seems impossibly tight, or are the pre 1974 boots la...

Does anyone have pictures of the boots (inside the tunnel and outside).on a 66 912? I have two different sized boots, one of which looks like a drive shaft boot, and can't see which one should go inside, or have I got the wrong boots.(Bought them on eBay) Many thanks in anticipation. Also thanks for...