Page 1 of 1
Standard EU chip (24 pin) for my 1987 Carrera 911 3.2
Posted: Thu May 04, 2006 3:22 pm
by Beaky
Probably in the wrong place...ops but
Does anyone have a spare stnadard chip they don't want or would sell?
When I replaced mine with one from Steve Wong, I thought I had put the original in a safe place, but the "young" nephew somehow got hold of it and as you can imagine well it's trashed now
Cheers!
Posted: Thu May 04, 2006 4:11 pm
by impmad2000
Sent you PM.
Cheers
Tim
Posted: Thu May 04, 2006 11:04 pm
by sladey
Hi Beaky,
Can I ask what you think of the Steve Wong chip - I've read good reports on pelican and am thinking of getting one
Would be grateful for any feedback
Cheers
Mark
Posted: Fri May 05, 2006 9:36 am
by Dyno Soar
My Steve Wong chip is awesome!!!!!! Steve is a nice guy indeed.
When I fix my engine from running on 5 cylinders and a suspected broken headstud or lose barrel nut I can demonstrate its seriously badd ass performance.
My car kills 993 C4S's with the wong chip running on 5 cylinders intermittently. Mad but true.
Hope my engine isn't wrecked

Posted: Fri May 05, 2006 11:02 am
by sladey
Thanks Alam
Posted: Fri May 05, 2006 12:02 pm
by Beaky
Hi Mark,
Just awesome, you can immediately feel the difference, on pick up and throughout the mid range, pulls stronger lower down the rev range and just keeps going
Well worth every penny, my recent Dyno showed 239 BHP not bad for an 18 year old motor, 98k on the clock, mechanically all stock bar the chip
Regards
Posted: Fri May 05, 2006 1:40 pm
by sladey
brill thanks - it's just going through a full rebuild at the moment so I want to run it in first - will then have to check how many pins my car is (it's an 87) and then I'll order one.
Thanks for the information - it's good to hear it from someone over here
Cheers
mark
Posted: Fri May 05, 2006 2:41 pm
by Beaky
I'm a PCGB member and on our forum there are well over a dozen or so members that have the Steve Wong chip, all very happy, also check Pelican, Rennist etc, they all say the same thing.
The good news is if you mod the engine, mass air flow, exhaust etc, Steve will continue to upgrade/map the chip to maximise the performance from your new spec's
Posted: Fri May 05, 2006 5:31 pm
by sladey
Brill - many thanks