Page 1 of 1

Bursch exhausts

Posted: Thu Mar 30, 2006 9:17 pm
by JonnyG
Anyone know of an importer into the UK of Bursch exhausts ? Google comes up with US distributors only so far.

Anything from those that know gratefully received

Posted: Thu Mar 30, 2006 9:27 pm
by fetuhoe
Johhny,

We are importing European Racing Headers if these are of any interest.

Regards

Chris

Posted: Fri Mar 31, 2006 3:40 am
by Jeroen
why'd you want a Bursch? They already rust in the box the come in
just be glad you can't find a UK dealer 8)

Posted: Fri Mar 31, 2006 7:48 am
by middlefour1
Jeroen wrote:why'd you want a Bursch? They already rust in the box the come in
just be glad you can't find a UK dealer 8)

Can't agree with that. I've had one on my fourteen for at least 8 years with no problems at all.

Posted: Fri Mar 31, 2006 12:49 pm
by JonnyG
going through the options out there, there is Dansk, the autofarm twin pipe and Bursch, and my budget is not for the autofarm set up.

Middlefour, assume it sounds good, any noticeable performance difference ?
Jeroen did you send it back ?
Fetuhoe, I need educating, when you refer to headers, which part of the exchangers and box do you mean, or all of it ? got any other info ?

Thanks for the info

Posted: Fri Mar 31, 2006 1:11 pm
by Jeroen
John, what type of muffler are you looking for?

Typically, the Dansk mufflers are good quality

I don't know what your budget is, but you could check out Triad (mild steel) or M&K (stainless) mufflers
I've heard very good responces on both

Headers are basically heat exchangers without heater boxes (or vise versa: heat exchangers are headers WITH heater boxes)

The european racing headers are very nice. Good build quality and fit

But with headers, you have no provision for heat, so it may not be an option for you

Posted: Fri Mar 31, 2006 2:21 pm
by Viv_Surby
Just put a 70mm s/s Dansk on mine and it sounds yummy....haven't taken it out for a full on blast yet either :P

Posted: Fri Mar 31, 2006 2:34 pm
by JonnyG
Right I see, thanks Jeroen and Viv. Yes I need the heat exchangers so will go for SSI at some point this year. I have faced the fact that the noise it makes is a big deal so maybe Dansk then. Where did you get it from Viv ?

Posted: Fri Mar 31, 2006 10:52 pm
by saxon
Jonny go for the dansk they do sound great. :wink:

Posted: Sat Apr 01, 2006 10:30 am
by middlefour1
JonnyG wrote: Middlefour, assume it sounds good, any noticeable performance difference ?

Sorry for the delay in getting back to you. Yes, it does sound good and I think the car runs a lot better with it on. It's a 35 year old engine so I don't give it a hard time but it does run very well and I'm more than happy with the Bursch. No quality issues at all. Dansk are very good too, I fitted many a one on my old Beetle.

Posted: Sun Apr 02, 2006 12:54 pm
by JonnyG
Thanks all. spoke to Transend yesterday, anyone got experience of their twin pipe sports box, no outlet on left, painted black and comes in galvenised mild or stainless. They say a couple of hp and good noise ?/

Posted: Sun Apr 02, 2006 3:35 pm
by hot66
If you are planning on doing any trackdays becareful.

Mick Cliff has a stainless twin outlet on his car & when measured @ the DDK trackday @ Elvington was over the limit. If I remember he was near 107Db's ?

Posted: Mon Apr 03, 2006 9:53 am
by Viv_Surby
JonnyG wrote:Right I see, thanks Jeroen and Viv. Yes I need the heat exchangers so will go for SSI at some point this year. I have faced the fact that the noise it makes is a big deal so maybe Dansk then. Where did you get it from Viv ?
From Euro Car Parts, Teddington but you can order from their webbie

Posted: Mon Apr 03, 2006 9:55 am
by JonnyG
Thanks lads