Early 911 parts for sale

Please add Porsche parts and anything you wish to sell here (no commercial sales)

Moderator: Bootsy

Post Reply
User avatar
PMNorris
DDK slapper chatter
Posts: 494
Joined: Wed Jul 10, 2013 5:36 pm
Location: Cobham, Surrey

Early 911 parts for sale

Post by PMNorris »

Updated to remove parts I sold at the swapmeet today.

I'm consolidating some of my previous posts with the remaining unsold parts:

Engine tinware part - new - £10
Image

Late style (for G series car 911.606.112.00) engine temp sensor - new - £20
Image

Distributor cap - New - £5
Image

Oil cooler adaptor - I had this made, test fitted it but didn't end up using it. It converts an early oil cooler outlet to use pressure fit oil pipes. £25
Image

6 unused spark plugs - BP5ES. I bought these as spares for my 79 3.2SS engine. £20 for all 6
Image

Oil pressure sender - New - £20
Image

Chain cover oil feed bits and bobs - Some new. Most used. £40 the lot
Image

Original Behr engine oil cooler... It leaks (not obvious from where). but presumably repairable. £100
Image

1970 T metal air filter. Very pretty in gloss black. £200
Image
Image

1970 T metal air filter snorkel - Original (right) - £100
1970 T metal air filter snorkel - Modified for performance - guaranteed at least an extra 50 bhp :) (left) - £50
Image
Image

79 SC cam shafts £150
Image

Original horn push - £100
Image

Seatbelt receivers - New - £30 from oldtimer-sicherheitsgerte.de
Image

1970T engine fuse/wiring panel - £50
Everything else in the pic is sold
Image

Repro window winder - £10
Original 70T LHD windscreen wiper arms - £50
Image

Steering column gasket - Bottom of column to rack - £50
Image

LHD 70T steering column cover - repaired - £30
Image

Large Left side flag mirror (I think this is original, but not sure how to check): £60
The small right side repro flag mirror in the pic is sold
Image
Image

Original centre caps: £100 for the set.
Image
Image

Porsche PEL-TOL-1170 (flywheel bolt tool): £15
Peugeot Ball joint tool (Pretty hopeless - but cheap, which is why I bought it) £3 to cover P&P.
Everything else in the pic is sold.
Image

Standard single outlet steel exhaust including straps - £200
Image

Engine oil pressure switch: 911 606 230 00. New. £6
Image

Oil sump gasket: 930-101-391-01. 1 left: £2
Image

Rotor arm: 930-602-902-01 New. This is the type that does not have the mechanical limiter, so for cars with an electronic ignition. £5
Image

Prices are + P&P

Please email me on paul.m.norris42@gmail.com if you are interested in any parts. Please also put a reply on this thread so I know who's first if more than 1 person is interested.

Paul
1996 993 Turbo X50 project.... Restoration work in progress!
1970 2.2 911 T / Ex RS Clone, now more original looking, with 1979 3.2 SS engine (sold)
1988 3.2 Carrera Commemorative edition (sold)
Post Reply