DDK - Die Deutschen Klassiker

I am looking for a butterfly actuating rod for an MFI system.

The rod that links the individual butterfly’s together on the throttle body - as per photograph.

They have a right hand thread one end and left hand thread the other. They are 4.9mm diameter and 88mm long. I do not need the Nuts or Ball Sockets necessarily but if complete its not a problem.

Thanks in advance



John

It's a linkage rod. I think they are M5. This one might fit but just measure the length and there are lots of alternatives.

https://ebay.us/m/TyAS7z

Sorry just read your text. The rod on its own. 100mm so just cut

https://ebay.us/m/vBNLbT

Sent from my 22011119UY using Tapatalk

Thanks Neil - great find. I have ordered a 100mm rod and will reduce the length.