Page 1 of 1
912 rocker bridge
Posted: Tue Jul 15, 2025 6:12 pm
by Spit Nolan
Just pulled my engine apart and my rocker bridge is in 2 pieces! Pretty sure that is going to be the most likely cause of my running issues.
Has anyone in UK got one who could get it out to me ASAP, hoping to rebuild ready for DDK meet this Saturday.
616.105.031.0R
Re: 912 rocker bridge
Posted: Tue Jul 15, 2025 9:07 pm
by rich73
Hi There,
Not used them before but looks like they are only 5 mins from me in Woking if you wanted me to take a look for you.
https://replicaparts.co.uk/products/por ... r-original
Rich
Re: 912 rocker bridge
Posted: Tue Jul 15, 2025 9:50 pm
by Nine One One
Spit
speak with Paul Stephens at PRS (member on here) should be the same as later type 356 + they do 912’s, I am sure he will have plenty, or failing that Max at Revival Cars, if posted tomorrow 24hr should be with you for Thursday?
Re: 912 rocker bridge
Posted: Tue Jul 15, 2025 10:42 pm
by Lightweight_911
Nine One One wrote: ↑Tue Jul 15, 2025 9:50 pm
Spit
speak with Paul Stephens at PRS ...
It's Paul
Smith (& his dad Mike Smith) at PRS - Paul Stephens is a different Porsche Specialist ...
.
Re: 912 rocker bridge
Posted: Tue Jul 15, 2025 11:40 pm
by Spit Nolan
Thanks all, have messaged PRS and few others already. Have seen the replica parts ones, ideally I only want one not a pair but will contact them too.
Re: 912 rocker bridge
Posted: Wed Jul 16, 2025 1:25 am
by Nine One One
Lightweight_911 wrote: ↑Tue Jul 15, 2025 10:42 pm
Nine One One wrote: ↑Tue Jul 15, 2025 9:50 pm
Spit
speak with Paul Stephens at PRS ...
It's Paul
Smith (& his dad Mike Smith) at PRS - Paul Stephens is a different Porsche Specialist ...
.
Thank you for the correction!!!
Re: 912 rocker bridge
Posted: Wed Jul 16, 2025 12:56 pm
by neilbardsley
Nine One One wrote:Lightweight_911 wrote: ↑Tue Jul 15, 2025 10:42 pm
Nine One One wrote: ↑Tue Jul 15, 2025 9:50 pm
Spit
speak with Paul Stephens at PRS ...
It's Paul
Smith (& his dad Mike Smith) at PRS - Paul Stephens is a different Porsche Specialist ...
.
Thank you for the correction!!!
Paul is probably your best bet. They have a good selection of new and used
Sent from my 22011119UY using Tapatalk
Re: 912 rocker bridge
Posted: Wed Jul 16, 2025 3:10 pm
by Spit Nolan
Part sourced thanks to Tuthill’s. Thanks all!
Re: 912 rocker bridge
Posted: Wed Jul 16, 2025 4:33 pm
by Bootsy
Everything crossed for you!
Re: 912 rocker bridge
Posted: Thu Jul 17, 2025 8:09 am
by Tuthill Parts
You`re welcome. Thanks for coming up for a tour!
Paul.
