DDK - Die Deutschen Klassiker

Faithful and authentic reproduction of the Behr front central oil cooler fitted to the Porsche 2.8 RSR and 914-6 GT....





Manufactured in the UK by one of the worlds leading suppliers of racing radiators, oil coolers and motorsport fabrications, Concept Racing ( https://conceptracing.co.uk ), these are fully functioning motor sport quality coolers, each pressure tested and built to perform at the highest level.

Built to the same dimensions of the original cooler (seen below) with end tanks and brackets cast to match the original Behr cooler perfectly. Complete with the correct oil pressure relief valve, internal spring and ball bearing, captive nuts and finished in the original Alocrom 407 protective coating to give the coolers that period authentic green tinge, I believe these are about as close as you can get to an original NOS item.

Available at GBP £2,500 + Shipping















Please message or email: darren@swindoncarandvan.co.uk for more details.

More pics to follow....

....super lightweight and weighing only 2.8kg, 0.5kg lighter than the original and likely more efficient....





....

....seen below with original NOS Behr cooler....

















....Porsche 3.0 RS /RSR Front Oil Cooler also available ... https://forums.pelicanparts.com/porsche ... ooler.html



...bigger but still lightweight and efficient...



....not a commercial venture and fabricated by enthusiasts for enthusiasts....these coolers came about due to our own needs, more details and the story can be seen here.. https://www.early911sregistry.org/forum ... Oil-Cooler

Thanks for looking

.....apologies to 914-6 GT owners, I'll post more pics of the 914-6 cooler below without brackets soon....



Cheers,

Hi Darren, as per my email - would like to relieve you of a 914-6 GT cooler

Another part of the oil system sorted

Thanks
Jon

Many thanks Jon and look forward to catching up when you collect.

We've now sold out of 914-6 GT coolers from the first half of the initial batch fabricated but will have a couple more in a few weeks - please note this is a very limited one-off production run and with a smaller demand for 914-6 most coolers will have brackets welded on for 911's so please do get in touch promptly if you have a need.

As with the 3.0 cooler all bar a few of these are destined for the States.

Many thanks,

Darren65 wrote: ↑Tue Mar 11, 2025 2:59 pm As with the 3.0 cooler all bar a few of these are destined for the States.

.....and finding their way onto very cool original cars being raced at major events!

Darren65 wrote:Many thanks Jon and look forward to catching up when you collect.

We've now sold out of 914-6 GT coolers from the first half of the initial batch fabricated but will have a couple more in a few weeks - please note this is a very limited one-off production run and with a smaller demand for 914-6 most coolers will have brackets welded on for 911's so please do get in touch promptly if you have a need.

As with the 3.0 cooler all bar a few of these are destined for the States.

Many thanks,

Nice to meet you today

Kind Regards
Jon


Sent from my iPhone using Tapatalk Pro

Nice to meet you to Jon,

Look forward to seeing a couple when fitted to your 914-6, sounds like a really cool project

All the best,

A few 2.8 RSR coolers available for immediate delivery although 914-6 GT coolers currently sold out.

There are a few more to be fabricated which will be towards the end of June although this will most certainly be the last batch with no further production planned.

Please be quick, these are recognised by respected experts as the best reproductions ever produced and none of the alternatives I've seen are credible or pretty!

Thank thanks

Fabrication of the final run of last seven coolers completed and taken for Alocrom treatment....

...very shiny to start with...



...but not for long...



....complete and looking period perfect...





....four of these are sold and will be shipped this week with only three coolers left for sale.

Thanks for looking

Just a few of the awesome cars these coolers are being fitted to ...

Cutler GT


Meaney GT


Stoddard GT


....we're now sold out of the current batch.

Not knowing how the split of RSR/914 coolers would go we held back the final 8 cores and end tanks which we plan to have fabricated at the beginning of October. Once these are made there will be no more.

At this stage we're undecided on how many we'll allocate to 914-6 GT's but if you think you might have a need now or in the future then please do let me know.

Many thanks,

....and they're loving these over on 914World...

http://www.914world.com/bbs2/index.php? ... 75110&st=0