Page 1 of 1
Wanted: Set of 6 2.2-2.4 Cylinder Heads
Posted: Wed Jan 01, 2025 3:51 pm
by youngbob
Prefer T heads and doesn't matter if they need rebuilding so long as no corrosion or broken aluminium
Prefer UK s as no import duties to worry about
Thanks
Steve
Re: Wanted: Set of [emoji239[emoji2392]] 2.2-2.[emoji2392] Cylinder Heads
Posted: Wed Jan 08, 2025 4:05 pm
by camperco
Hi Steve. We have several sets of heads just coming in from the USA. Ship is unloading our container now we’ll have them next week.
Angus
Sent from my iPhone using Tapatalk Pro
Re: Wanted: Set of [emoji239[emoji2392]] 2.2-2.[emoji2392] Cylinder Heads
Posted: Wed Jan 08, 2025 4:06 pm
by camperco
Sent from my iPhone using Tapatalk Pro
Re: Wanted: Set of [emoji239[emoji2392]] 2.2-2.[emoji2392] Cylinder Heads
Posted: Thu Jan 09, 2025 11:24 am
by youngbob
Perfect, is it OK to call you later next week?
camperco wrote: ↑Wed Jan 08, 2025 4:05 pm
Hi Steve. We have several sets of heads just coming in from the USA. Ship is unloading our container now we’ll have them next week.
Angus
Sent from my iPhone using Tapatalk Pro
Re: Wanted: Set of 6 2.2-2.4 Cylinder Heads
Posted: Thu Jan 09, 2025 2:39 pm
by camperco
Yes of course. What is your application?
We have a full set machined for twin plug, ported, machined and ready to go if that's any use?
Re: Wanted: Set of 6 2.2-2.4 Cylinder Heads
Posted: Thu Jan 09, 2025 9:06 pm
by youngbob
I bought a ‘spare’ engine 30 years ago as needed the heads so I’ve finally decided to build it up. I’m building it back up possibly to sell or to put into something a bit different but going to keep it T spec at moment with all new bearings etc. I’m happy to rebuild the heads if needed as I’ve got the tools for the valve guides and seats etc. I have thought of fitting some E or Solex ground cams as well
camperco wrote: ↑Thu Jan 09, 2025 2:39 pm
Yes of course. What is your application?
We have a full set machined for twin plug, ported, machined and ready to go if that's any use?
