Page 1 of 2

Design 911

Posted: Sat Dec 21, 2024 8:28 pm
by desert rat
Hi all,
I've been waiting 2 months for my order from Design 911 to be completed.
Has anyone else ever had issues with orders from them taking so long.
I get the occasional email stating the parts they have and parts pending, but it looks like I'll be waiting until next year for the order to be completed.
Merry Christmas everyone and a Happy New Year.

Re: Design 911

Posted: Sat Dec 21, 2024 8:58 pm
by 911hillclimber
Yep, been there some years ago.
If one part of your order is out of stock, they hold the whole order.
I’ve complained, but the only answer I had was to phone them and place the order, leaving out the back order parts for later ordering…
Irritating!

Re: Design 911

Posted: Sat Dec 21, 2024 9:15 pm
by Nine One One
One of the main issues is they allow you to order and pay for items, they do not even have in stock!
Plenty of members have had similar issues with them, not good.

Re: Design 911

Posted: Sun Dec 22, 2024 1:07 am
by stretch
They order the item when you order. Pretty frustrating. Just order it from Porsche, probably cheaper too !

Re: Design 911

Posted: Sun Dec 22, 2024 7:12 am
by markm
stretch wrote: Sun Dec 22, 2024 1:07 am They order the item when you order. Pretty frustrating. Just order it from Porsche, probably cheaper too !
Yep, this

Re: Design 911

Posted: Sun Dec 22, 2024 7:51 am
by Ian Comerford
I once tried ordering some spark plugs from D911…… never again!
https://www.impactbumpers.com/forum/ind ... ark-plugs/

Re: Design 911

Posted: Sun Dec 22, 2024 9:08 am
by 911hillclimber
I ordered an AOS breather for my 987.2 Boxster a few years ago oddly from OPC, and it was much cheaper than anyone, genuine part of course, but even in stock!

D911 offer a one-stop-shop but their system as said does not tell you it is out of stock, so you click and pay then are advised OOS, delivers might be estimated.

I think they now show prices including VAT, another of my pet irritations with many suppliers dealing with Joe Public.

Type911 at least do advise on the part if out of stock.

Re: Design 911

Posted: Sun Dec 22, 2024 11:46 am
by SeanP
It’s often cheaper to order from your OPC or even Rosepassion!
If the order including delivery is under £135 you don’t pay import duty on Rosepassion orders.
Had to chase D911 on an order delayed by three lock tabs not being in stock but they had others exactly the same in stock with a different part number.

Re: Design 911

Posted: Sun Dec 22, 2024 4:59 pm
by desert rat
I did get a lot of parts from Rose Passion before Brexit and found their service very good.
I am also on the Porsche Classic register and buy parts from my local Porsche dealer with a discount. Roger Bray is only 15 minutes down the road so use his services quite a bit, especially ordering parts from Stoddard as he has big deliveries from them which helps.
I might make this my last order from D911.

Re: Design 911

Posted: Sun Dec 22, 2024 8:28 pm
by RobFrost
I keep going back to design911, but taking your order then telling you afterwards it's a month wait is really irritating. I find that if you follow up by phone or email, it helps speed up your order. Also, if you don't follow up, I've had orders seemingly forgotten about for months.

Sent from my SM-S918B using Tapatalk


Re: Design 911

Posted: Sun Dec 22, 2024 8:52 pm
by anglophone1
bunch of tossers - Rose Psssion good
C


Sent from my iPhone using Tapatalk

Re: Design 911

Posted: Sun Dec 22, 2024 9:15 pm
by markm
Dont hold back Clive

Re: Design 911

Posted: Sun Dec 22, 2024 9:20 pm
by Lightweight_911
.

Wouldn't buy anything from them !

In no particular order I get parts from: Type 911, Heritage Parts, Roger Bray, Porsche, or one of the European suppliers - Maria Habeck (MHTeile), Rose Passion, etc ...


.

Re: Design 911

Posted: Sun Dec 22, 2024 10:29 pm
by 911hillclimber
Just to balance my opinion above..
If I'm after normal parts, oil filters and the such they seem good in my experience. They stock such things, but if you want something special, ie linkless timing chains for a 3.2 flat 6 then the order is taken, but a risk it is not in stock and then you wait...
I got caught out on my Lola engine rebuild this way, but got stung far worse by USA suppliers.

My OPC is 20 mins away, so should try them more often.

Type911 sell parts that are better than Des911, esp the silicon sealed rocker covers for the aircooled engines (for example), or at lest the last time I ordered some 12 months ago.

Today, I can't see why a web site does not have an flag that is triggered when stock is gone and an estimate date for availability.

Re: Design 911

Posted: Sun Dec 22, 2024 11:28 pm
by DustyM
To balance the negative feedback for D911 above, I’ve used them for years and never had any issues always helpful and communication is good.

However I’m using the trade dept which sounds like a different experience to a retail customer unfortunately.


Sent from my iPhone using Tapatalk