DDK - Die Deutschen Klassiker

Evening all, been struggling most of the afternoon with the fixing bolts on the driver's seat.

Finally got them out but they are a bit worse for wear. Can't find them on the Porsch parts diagram and wondered if anyone on here might know the size, please?

Looking to source replacements but not from an OPC.

Thanks.

You can measure them and find replacements I’m sure. Diameter and length of the thread and what type of head it is. Also if it’s marked 8.8 or 10.9 showing its strength.

I’d be tempted to try OPC though it may not be as bad as you think and it would be right

Felix had a few sets available for sale on IB, they might be the type you need.
https://www.impactbumpers.com/forum/ind ... ent-454018

Thanks for your replies.

Should be fixed in a day or so.

For future reference Les, the seats and all parts are in a separate section on pet, Seatz 1984-98

Page 693 onwards.

https://www.porsche.com/filestore.aspx ... pe=default

Thanks Bruce for the feedback and link.

One hell of a document!

Cheers.

If anybody else goes looking for these, Porsche part number is 900 119 030 02 - Pan Head Screw M8 x 20

https://www.germanautoparts.com/genuine ... 119-030-02

https://www.pelicanparts.com/More_Info/ ... 030-02-OEM