Page 1 of 1
1972 / 1973 inertia reel 911 seat belt covers
Posted: Tue Jun 25, 2024 1:19 pm
by emjo
Good afternoon
Can anyone assist I'm looking to acquire a pair of original inertia seat belt covers with the original fitting brackets
Many thanks
Re: 1972 911 rear seat belt covers
Posted: Tue Jun 25, 2024 7:05 pm
by Lightweight_911
.
I'm not entirely sure what you're looking for - what exactly do you mean by 'original rear seat belt covers' ?
- the black plastic covers over the chrome ends ?
Same for 'original fitting brackets' ? ...
.
Re: 1972 911 rear seat belt covers
Posted: Wed Jun 26, 2024 8:56 am
by emjo
Morning
I have photo on my iPhone of the seat belt cover which hides the inertia reel mechanism trying to load the picture here is truly beyond my skill levels sorry
can anyone kindly assist with a picture please
Re: 1972 911 rear seat belt covers
Posted: Wed Jun 26, 2024 9:05 am
by Lightweight_911
.
Aah - now I know what you mean !
I thought you were looking for parts for the rear seat belts ...
For reference, here's a pair I had many years ago:
Re: 1972 911 rear seat belt covers
Posted: Wed Jun 26, 2024 9:41 am
by emjo
Hi Andy
Thank you for the picture yes that's them
Re: 1972 911 rear seat belt covers
Posted: Wed Jun 26, 2024 10:08 am
by Lightweight_911
.
You might want to change the title of this thread to something like: '1972/'73 inertial reel side covers' - others might have interpreted your request incorrectly like me.
I don't know if anyone is reproducing these nowadays but they were always difficult to find secondhand - to the extent that people used to adapt the later '74-on versions ...
.
Re: 1972 / 1973 inertia reel 911 seat belt covers
Posted: Fri Jun 28, 2024 1:56 pm
by veertientien
Reproduction is available, I believe from CarPoint in Germany. check eBay.
Cees
Re: 1972 / 1973 inertia reel 911 seat belt covers
Posted: Fri Jun 28, 2024 4:36 pm
by emjo
Thanks Cees
Nothing showing on eBay or their website unfortunately, in truth i'd prefer original
Re: 1972 / 1973 inertia reel 911 seat belt covers
Posted: Fri Jun 28, 2024 6:03 pm
by Nine One One
https://www.partsklassik.com/p-878-seat ... r-set.aspx
https://www.boutiqueporschemontpellier. ... e-porsche/
Believe the part numbers are
LEFT - 91155506901 ( or 90155506900, 90155506901, 91155506900, MSU001146 )
RIGHT - 91155507001 ( or 90155507000, 90155507001, 91155507000 )
Re: 1972 / 1973 inertia reel 911 seat belt covers
Posted: Sat Jun 29, 2024 8:15 am
by 911GP
Remember to order the belt guide plate too. I can’t remember but I think a fixing bracket is also needed that sits behind the cover?
Re: 1972 / 1973 inertia reel 911 seat belt covers
Posted: Sat Jun 29, 2024 9:13 am
by emjo
Good morning
Thank you for the heads up on Partsklassik my thinking is before ordering repro parts I'm going to give my searches a little time to see if Santa can locate an original pair of covers
Fingers crossed
Re: 1972 / 1973 inertia reel 911 seat belt covers
Posted: Wed Jul 31, 2024 8:46 pm
by emjo
bump please
Re: 1972 / 1973 inertia reel 911 seat belt covers
Posted: Thu Aug 22, 2024 3:42 am
by veertientien
In the US, well known guy on the ESR:
https://www.ebay.de/itm/116210030347
Regards,
Cees