Page 1 of 1
912 Seat Mechanism - seeking parts reclining mechanism
Posted: Thu Jul 06, 2023 3:00 pm
by chrismarine
Hi,
Seeking parts for reclining seat mechanism for Porsche 912 - as per attached photos.
(broken gear, no move). Seat type is without headrest.
Any advice or guidance where to locate will be appreciated,
Best Regards
Christos
Re: 912 Seat Mechanism - seeking parts reclining mechanism
Posted: Thu Jul 06, 2023 4:58 pm
by SeanP
What year is your car?
They look like 1969/70 recliners with the seat fold tab on them?
You cannot buy spare parts for them as far as I know
Re: 912 Seat Mechanism - seeking parts reclining mechanism
Posted: Thu Jul 06, 2023 8:50 pm
by chrismarine
Hello Sean,
It’s a friend’s car, it’s a 911E - 1969 but the seats are supposed to be ex. 912 car as the owner claims.
Re: 912 Seat Mechanism - seeking parts reclining mechanism
Posted: Fri Jul 07, 2023 10:08 am
by deano
The bracket assemblies shown in your pics certainly crop up on Ebay, at a price of course like everything for our cars, and often with the spline bolt still attached.
I needed a spline bolt, and had to buy the whole assembly to obtain one.
If it is the spline bolt that you need, note that there are at least two different spline bolt lengths (roughly 60mm and 45mm). The long one can be cut down to match a short one. If the teeth have gone behind the chrome bracket, then obviously you need a matching chrome bracket....