Page 1 of 1
911T crankshaft wanted
Posted: Sat Jan 14, 2023 1:25 pm
by samcro
Has anyone got a really nice 911T crankshaft for my 1971 2.2 engine as looking at my one it seems to be worn out according to my measurements,I’m thinking maybe a replacement is needed,please let me know if you a good useable one for sale thanks
Cheers
Andy
Re: 911T crankshaft wanted
Posted: Sat Jan 14, 2023 2:59 pm
by neilbardsley
Hopefully someone will have one for you.
However, I think in 616 land the bearing are toughest to find? Have you measured the case before you look for a crank? Apologies if you have considered this already
Sent from my M2004J19C using Tapatalk
Re: 911T crankshaft wanted
Posted: Sat Jan 14, 2023 5:52 pm
by samcro
The case was just measured and machined and all is good but I’ve just measured my crankshaft journals and they’re below the limit,I’m guessing I need another crankshaft
Re: 911T crankshaft wanted
Posted: Sun Jan 15, 2023 10:13 pm
by desert rat
I have one, std/std. Pm me your email and I'll send photos.
Re: 911T crankshaft wanted
Posted: Tue Jan 17, 2023 3:02 pm
by samcro
PM sent
Re: 911T crankshaft wanted
Posted: Fri Jan 20, 2023 5:44 pm
by rft218
I also have one if you need it
Re: 911T crankshaft wanted
Posted: Fri Jan 27, 2023 6:14 pm
by Jonnydaz53
i may be interested can you pm me some pics sizes and price please
thanks
Re: 911T crankshaft wanted
Posted: Wed Feb 01, 2023 4:16 pm
by marleybones
If you need a replacement crankshaft for your T, you might want to consider upgrading to a 2.0, 2.2,2.4 Counterbalanced crankshaft. Now that you have completely torn down your engine, spend a little extra and add some HP. A counterbalanced crank will allow your engine to spin at much higher rpm's, which is where the power is on the early smaller displacement engines...
