Page 1 of 1
Popping IDAs?
Posted: Fri Jan 23, 2004 10:56 am
by MdR
Think I've got one or more blocked (idle) jets on my 40IDAs
I'm reasonable familiar with Dell'orto DRLAs but not IDAs
Which jets are which are where on the carbs are they?
Martin
Posted: Fri Jan 23, 2004 10:47 pm
by Alan @ CanfordClassics
Hi Martin,
Taking the idel jets out is a very straight forward quick job. Look closely at it and you shol dbe able to see if there is any blockage. Give them all a good clean out. The diagramme linked below shows you where they are located on the sides of the carb.
http://www.pelicanparts.com/914/Parts/9 ... r3_big.htm
HTH
Alan.UK
Posted: Mon Jan 26, 2004 3:49 pm
by MdR
Thanks Alan
I'll have a mooch around then back of the car when I get a chance!
Martin
Posted: Wed Jan 28, 2004 3:11 pm
by MdR
Thanks Alan
1 x flat head screwdriver + 1 x airline + 1 x ultrasonic cleaner = much smoother idle.
Martin
Posted: Wed Jan 28, 2004 5:34 pm
by Alan @ CanfordClassics
Any time,
Glad you got it fixed.
Alan