Page 1 of 1
H1 trim ring etc
Posted: Wed Jul 21, 2021 11:36 am
by knapmann
Sorted now thanks to DEEMAN! - Cheers Ian
Re: H1 trim ring etc
Posted: Wed Jul 21, 2021 12:05 pm
by Lightweight_911
knapmann wrote:
Also need, a light pin from a rear heated screen knob.
thanks
There's nothing 'special' about these - in the past I've just cut/used a suitable length of clear perspex rod (4mm diameter from memory) - something like this:
https://www.ebay.co.uk/itm/281780005228 ... SwjVVV2Kla
.
Re: H1 trim ring etc
Posted: Wed Jul 21, 2021 12:53 pm
by majordad
That’s good info Andy, thanks
Re: H1 trim ring etc
Posted: Wed Jul 21, 2021 2:08 pm
by 911GP
Are H1 rings different to H4? I have two H4 rings available.
Thanks
Gitesh
Re: H1 trim ring etc
Posted: Wed Jul 21, 2021 2:42 pm
by DEEMAN
Neil, you have an e-mail.
Regards
Ian
Re: H1 trim ring etc
Posted: Wed Jul 21, 2021 2:52 pm
by knapmann
911GP wrote:Are H1 rings different to H4? I have two H4 rings available.
Thanks
Gitesh
Yes H1s have 5 screw holes in them vs 3 for H4s