Fuchs Wheel refurb
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
Fuchs Wheel refurb
Who is doing refurbs now? I checked with MCE and they seem to do a great job.
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
- Bootsy
- Site admin and the Boss
- Posts: 24005
- Joined: Sat Nov 08, 2003 6:09 pm
- Location: Norwich
- Contact:
Re: Fuchs Wheel refurb
Canford Classics https://canfordclassics.co.uk
Biaggio https://www.ebay.co.uk/usr/rockchick_1? ... 7675.l2559
MCE as you say
Not sure if Nick still does them? http://www.early911.co.uk/html/fuchs_rims.html
Biaggio https://www.ebay.co.uk/usr/rockchick_1? ... 7675.l2559
MCE as you say
Not sure if Nick still does them? http://www.early911.co.uk/html/fuchs_rims.html
1972 911T | 1994 993 Carrera | 1999 986 Boxster | 1990 T25 Camper
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Vintage Heuer, Omega, Zenith and other vintage watches - http://www.heuerheritage.co.uk
Re: Fuchs Wheel refurb
Bootsy, the biaggio link doesn't work, it takes me to an ebay page but nothing about him.
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
- KS
- Nurse, I think I need some assistance
- Posts: 14997
- Joined: Fri May 07, 2004 3:12 pm
- Location: Cornwall
Re: Fuchs Wheel refurb
Just go to the eBay page and then click on ‘Business details’. It brings up his name, address and phone number. Also you can visit his items for sale, which are often his services rather than specific items.domtoni wrote:Bootsy, the biaggio link doesn't work, it takes me to an ebay page but nothing about him.
-
- Put a fork in me, I'm done!
- Posts: 1672
- Joined: Fri Mar 01, 2013 11:45 am
- Location: Kernow - good old Cornwall
Re: Fuchs Wheel refurb
Vert-Ego Ltd
Biagio Chrzanowski
82 Rushden Road
Wymington
Rushden
Northamptonshire
NN10 9LH
United Kingdom
Phone:01933318859
Email:biagio911@btinternet.com
With the refurbishing listing
https://www.ebay.co.uk/itm/292102213445 ... XQeKNTMKaw
Biagio Chrzanowski
82 Rushden Road
Wymington
Rushden
Northamptonshire
NN10 9LH
United Kingdom
Phone:01933318859
Email:biagio911@btinternet.com
With the refurbishing listing
https://www.ebay.co.uk/itm/292102213445 ... XQeKNTMKaw
Re: Fuchs Wheel refurb
Thanks, after posting, I did find contact details and he's to call me back later today.
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2115
- Joined: Sat Oct 26, 2013 12:42 am
- Location: Oxfordshire
Re: Fuchs Wheel refurb
Cranford Classics now only does wheel refurbishment for cars they are restoring.
Rust Never Sleeps
Re: Fuchs Wheel refurb
And they are too far for me to go.
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2115
- Joined: Sat Oct 26, 2013 12:42 am
- Location: Oxfordshire
Re: Fuchs Wheel refurb
Closer to you would be Badger Anodising in Birmingham. They will strip, polish and anodize Fuchs. Very reasonably priced. You would have to mask and paint them yourself which is a bit fiddly but not difficult.domtoni wrote:And they are too far for me to go.
Last edited by BILLY BEAN on Sat Jul 10, 2021 9:30 am, edited 1 time in total.
Rust Never Sleeps
Re: Fuchs Wheel refurb
Thanks, but I'm not all that good with mechanical or painting stuff, better to pay more and have the job done well.
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
Re: Fuchs Wheel refurb
I suggest pay Badger to do the above then a paint shop to spray, I did just that and saved a lot of money. The result is not concours perfect though, because I think my rims needed skimming to get some minor pitting out, but I was very reluctant to get that done as I'm not convinced anyone can keep to the profile, and by the way Badger wouldn't be able to offer that.
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2115
- Joined: Sat Oct 26, 2013 12:42 am
- Location: Oxfordshire
Re: Fuchs Wheel refurb
I think you may be surprised at the cost of Fuchs wheel restoration.domtoni wrote:Thanks, but I'm not all that good with mechanical or painting stuff, better to pay more and have the job done well.
Rust Never Sleeps
Re: Fuchs Wheel refurb
I can mask and paint them for you, located in BedworthBILLY BEAN wrote:Closer to you would be Badger Anodising in Birmingham. They will strip, polish and anodize Fuchs. Very reasonably priced. You would have to mask and paint them yourself which is a bit fiddly but not difficult.domtoni wrote:And they are too far for me to go.
Westbound Restorations since January 19
Re: Fuchs Wheel refurb
Thanks, not sure what I want to do.
domtoni
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
1969 911E
ER Polybronze bushings, turbo tie rod ends, and 21/26mm torsion bars
Re: Fuchs Wheel refurb
I had mine done art Art Wheels in Strasbourg, but as I was living in Switzerland at the time, there was no shipping cost (I drove there, they swapped the wheels over to a loan set and then did the refurb). I'm very happy with the results.
Paul
Paul
1970 2.2 911 T / Ex RS Clone, now more original looking, with 1979 3.2 SS engine
1988 3.2 Carrera Commemorative edition (sold)
1988 3.2 Carrera Commemorative edition (sold)