Page 1 of 1

3.2 Carrera Engine Box, DME and Wiring loom

Posted: Mon Mar 22, 2021 2:07 pm
by RENNSPORT CLASSICS
I am looking for a complete transplant engine, gearbox with side mounted oil cooler, DME unit and associated loom to return a 3.2 Carrera engine to a car. Would consider a 3.2 on PMO's or other non-standard injection system. I am not looking for a disassembled re-build project unless it is (a) cheap and (b) complete as I prefer to pay a decent price to save time.

A correct 3.2 Carrera gearbox on it's own would also be of interest as I have been offered an engine through the trade and this would complete that side of what is missing.

Any help would be appreciated.

Re: 3.2 Carrera Engine Box, DME and Wiring loom

Posted: Tue Mar 23, 2021 4:46 pm
by Berny
I have a 3.2 Carrera ECU and engine loom

Re: 3.2 Carrera Engine Box, DME and Wiring loom

Posted: Tue Mar 23, 2021 5:24 pm
by RENNSPORT CLASSICS
Berny wrote:I have a 3.2 Carrera ECU and engine loom
I'll PM you

Re: 3.2 Carrera Engine Box, DME and Wiring loom

Posted: Tue Mar 23, 2021 9:12 pm
by Alan @ CanfordClassics
I also have the entire induction, loom, ECU, dizzy, pump etc. Taken from a good running motor with 70k on it.

Alan

Re: 3.2 Carrera Engine Box, DME and Wiring loom

Posted: Tue Mar 23, 2021 10:45 pm
by RENNSPORT CLASSICS
Alan @ CanfordClassics wrote:I also have the entire induction, loom, ECU, dizzy, pump etc. Taken from a good running motor with 70k on it.

Alan
Thanks Alan, I may need those as they often don't come with the engine. I have been offered several rebuilds so far as possibilities so we shall see what develops.