Page 1 of 1
conversion flywheel
Posted: Thu Oct 01, 2020 11:29 pm
by massivesplitproject
does anyone have a link to a conversion flywheel to put a later engine onto a early 901 gearbox please, i cannot find one
Re: conversion flywheel
Posted: Fri Oct 02, 2020 8:10 am
by 911hillclimber
Patrick Motorsport in the USA?
Re: conversion flywheel
Posted: Fri Oct 02, 2020 8:52 am
by Lightweight_911
.
Which engine ?
.
Re: conversion flywheel
Posted: Fri Oct 02, 2020 6:02 pm
by gridgway
For my conversion to put a 73 2.4 motor into my 69 car and 901 box, I am expecting (coz that's what I was told) just to use the flywheel off the early motor.
Graham
Re: conversion flywheel
Posted: Fri Oct 02, 2020 6:09 pm
by Lightweight_911
.
That's correct.
It's not so straightforward if fitting a later engine with a 9-bolt flywheel ...
.
Re: conversion flywheel
Posted: Fri Oct 02, 2020 6:46 pm
by gridgway
ah yes, it's ok with a 6 bolt one. On the Patrick site there are 901 conversion flywheels for 964s and 993s (for example) which I assume are the 9 bolt ones.
Re: conversion flywheel
Posted: Sun Oct 04, 2020 1:56 pm
by massivesplitproject
yeah mine is 9 bolt i think , it s a 3.0sc , so do we think the 964 type is correct one
Re: conversion flywheel
Posted: Sun Oct 04, 2020 9:31 pm
by rhd racer
Give them a call or drop them a note and they will give loads of advice. I spoke to Sean when I did my 3.0SC to 901 / 914 box conversion about 15 years ago. He was a fantastic help, and talked through the many clutch options to suit my hill climb application.