SCAT crank

[Ian Gunney]

Does anyone know if there is a UK or European distributor for 912 SCAT cranks?

cheers

Ian

[mycar]

You could try PRS. That's where I got mine.

[neilbardsley]

I think that Andy Prill is the European Distributor but would also try PRS first

Ps unless you want to rev your engine to 8k an not sure of the benefit of Scat cranks? Plus you have to modify the bearings to fit. Says someone with zero experience. Speak to an expert

Have a look at Peter Graham's engine rebuild thread on 912bbs

Sent from my Redmi 7 using Tapatalk

[Ian Gunney]

Cheers both - didn't realise Paul sold them.

Ian

[Timo]

Neil as far as I’m aware a Scat crank is often the only option once your original Porsche crank has been machined to more than first under size due to the distinct lack of availability of bearings!

[KS]

As an aside, Scat makes new 356/912 cranks for Porsche...

[neilbardsley]

Neil as far as I’m aware a Scat crank is often the only option once your original Porsche crank has been machined to more than first under size due to the distinct lack of availability of bearings!

I had heard that bearings are hard to find but there are other options? I don't have the experience to say which to use. That is where an experienced engine builder earns their pennies

On that front Ian wasn't your engine which built by your Dad and sorted by PRS? Hopefully nothing has gone wrong

https://aapistons.com/collections/porsc ... rankshafts


Sent from my Redmi 7 using Tapatalk