DDK - Die Deutschen Klassiker

Hello all,

Does anyone have or know where I can get the plastic washers that go under ther rear quarter windows.
5each side I think for a 69t?

Thanks Lee

Lee - I assume you mean the spacers that go under the trim panel on the rear quarter glass? If so the nyou can get them from a Porsche OPC. Part numbers and qty below - not expensive.

90154341920 spacer 4mm - 3 a side
90154342120 spacer 1.5mm - 1 a side
90154342220 spacer 3mm - 1 a side

.

There were originally 3 different thicknesses used to take account of the curvature of the anodised aluminium trims.

I know that they're available from Stoddard's so could be available direct from Porsche.

Part nos are:

901.543.419.20
901.543.421.20
901.543.422.20

I seem to remember that the thinnest version used to be available from Roger Bray.

I have a feeling that people often tend to use flexible bitumastic body seal ('dum dum') nowadays ...

.

Haha - Robin beat me to it whilst I was typing ...

Thanks for the info guys much appreciated

Regards Lee

Does anybody know the part number for the small screws that go with the spacer washers?
Or are they easy to buy from a hardware store?

Thanks guys.

Lee

You could do yourself a big favour and get hold of the PET / Part number manual for your car. It will be your best friend if you are doing a full restoration.

Ok good idea.

Thanks Lee

All are available from RosePassion. I bought them all in Dec. I looked at a number of websites and they were the only one that had all the washers, correct screws, rubbers and other parts that I needed for a complete popout window refurb, including the triangular washer thing that goes under the popout window mechanism.
https://www.rosepassion.com/fr/rondelle ... ent-P13701 x6
https://www.rosepassion.com/fr/elargiss ... ie-P264966 x2
https://www.rosepassion.com/fr/rondelle ... ent-P13703 x2

Paul

Design 911 do all the washers but not the small screws.

Thanks Lee