Page 1 of 1

914 window mech

Posted: Sat Jun 09, 2018 9:00 pm
by ThreeTwo
Evening...spot of bother with my 914 window. Mrs C and I are cruising across northern France and today it rained...a lot and she over did the winding when tightening the window..in Sarah's defence water was dripping on to her!!

The toothed section of the mech has detached from the cog on the back of the window winder. Taken door card off but not able to refit or even see how it goes

Any thoughts (of the helpful variety!!..) much appreciated

Take it easy

Re: 914 window mech

Posted: Sat Jun 09, 2018 10:12 pm
by Dean.s
Are you able to remove it? 2 blocks of wood to secure the window shut in the interim.

Re: 914 window mech

Posted: Mon Jun 11, 2018 11:58 am
by rhd racer
You should be able to undo the nuts that hold the channel which fixes the window to the mechanism, and hold up with some pieces of wood as suggested (to save removing the whole mechanism)

Good luck!

Re: 914 window mech

Posted: Mon Jun 11, 2018 3:05 pm
by ThreeTwo
Thanks for messages....window staying up so far.

Back Saturday so will add to 'to do list' !!