Wanted 915 Bell Housing for 1986 32 carrera
Moderator: Miggs
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2181
- Joined: Fri Oct 15, 2010 7:31 am
- Location: Ireland
- Contact:
Wanted 915 Bell Housing for 1986 32 carrera
Re : 1986 911 32 Carrera with 915 gearbox.
I am looking for a 915 Bell housing to suit above ?
I am looking for a 915 Bell housing to suit above ?
Rds,
Jasper
Email :denisamurphy@gmail.com
97 993C4S,64 356C,9112.7 RS clone,03Manthey K410 GT3,70 2.2 E,86 32 Coupe,66 230SL,70 E type 4.2,03BMW E46M3, 981 3.4S PDK, VW Touareg 3.0TDI..2 Scotties, 22 Aquador.
Jasper
Email :denisamurphy@gmail.com
97 993C4S,64 356C,9112.7 RS clone,03Manthey K410 GT3,70 2.2 E,86 32 Coupe,66 230SL,70 E type 4.2,03BMW E46M3, 981 3.4S PDK, VW Touareg 3.0TDI..2 Scotties, 22 Aquador.
-
- Nurse, I think I need some assistance
- Posts: 19027
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Wanted 915 Bell Housing for 1986 32 carrera
Do you mean the main case in aluminium?
Rather oddly I actually have an empty case in the shed!
It has been 'modified' to make the main bearings an interference fit by centre punch marks all round the inside of the bearing bores, but can be bored and sleeved by Mike Bainbridge.
Should stress that I didn't do that centre punching!
As far as I know the case is sound, came from another DDK'r some years ago for a still-born project of mine.
Is it of some use to you? Can photograph it late tomorrow.
Graham.
Rather oddly I actually have an empty case in the shed!
It has been 'modified' to make the main bearings an interference fit by centre punch marks all round the inside of the bearing bores, but can be bored and sleeved by Mike Bainbridge.
Should stress that I didn't do that centre punching!
As far as I know the case is sound, came from another DDK'r some years ago for a still-born project of mine.
Is it of some use to you? Can photograph it late tomorrow.
Graham.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2181
- Joined: Fri Oct 15, 2010 7:31 am
- Location: Ireland
- Contact:
Re: Wanted 915 Bell Housing for 1986 32 carrera
Yes , its the complete casing. Appreciate a photo very much.
Thank you.
Thank you.
Rds,
Jasper
Email :denisamurphy@gmail.com
97 993C4S,64 356C,9112.7 RS clone,03Manthey K410 GT3,70 2.2 E,86 32 Coupe,66 230SL,70 E type 4.2,03BMW E46M3, 981 3.4S PDK, VW Touareg 3.0TDI..2 Scotties, 22 Aquador.
Jasper
Email :denisamurphy@gmail.com
97 993C4S,64 356C,9112.7 RS clone,03Manthey K410 GT3,70 2.2 E,86 32 Coupe,66 230SL,70 E type 4.2,03BMW E46M3, 981 3.4S PDK, VW Touareg 3.0TDI..2 Scotties, 22 Aquador.
-
- Nurse, I think I need some assistance
- Posts: 19027
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Wanted 915 Bell Housing for 1986 32 carrera
Ok, will take a few and post on here, inside and outside.
Shopping tomorrow for the wife's Xmas present...
Shopping tomorrow for the wife's Xmas present...
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- Nurse, I think I need some assistance
- Posts: 19027
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Wanted 915 Bell Housing for 1986 32 carrera
Jasper; straight out of the shed, so please forgive the cobwebs, it's been in there for 3 years. It's in the garage now, so can take more pics if needed.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Re: Wanted 915 Bell Housing for 1986 32 carrera
Sorry to be a party pooper, but that is an '80 - '83 SC rear case according to the id number (915/62) and lack of cut out for 3.2 flywheel sensors.
Mark
Mark
-
- Nurse, I think I need some assistance
- Posts: 19027
- Joined: Mon Mar 10, 2008 6:26 pm
- Location: West Midlands
Re: Wanted 915 Bell Housing for 1986 32 carrera
Yes, I've already told Jasper it could be an SC box.
Cutting the slot for the 3.2 sensors is easy.
He knows what it is, it may not be right.
Cutting the slot for the 3.2 sensors is easy.
He knows what it is, it may not be right.
73T 911 Coupe, road/hillclimber 3.2L
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
Lola t 492 / 3.2 hillclimb racer
Boxster 987 Gen II 2.9
-
- I luv DDK!
- Posts: 779
- Joined: Fri Mar 31, 2006 10:54 am
- Location: Kendal CUMBRIA
Re: Wanted 915 Bell Housing for 1986 32 carrera
HI Jasper
has you gearbox case (that is in the car) any sign of a No' on the bottom of the case, the case you will need will have to be a late one with the smaller input-shaft bearing , unless it is changed for the older larger type,
was the pinion bearing loose in the original, as to why the case was changed, also was the pinion re-set in the case in the car and the diff re- set to match
I will have a look and see if I have a 3.2 case, IF I have it will need the pinion bearing sorting out, unless you have sorted out a case, or the original?
regards mike
has you gearbox case (that is in the car) any sign of a No' on the bottom of the case, the case you will need will have to be a late one with the smaller input-shaft bearing , unless it is changed for the older larger type,
was the pinion bearing loose in the original, as to why the case was changed, also was the pinion re-set in the case in the car and the diff re- set to match
I will have a look and see if I have a 3.2 case, IF I have it will need the pinion bearing sorting out, unless you have sorted out a case, or the original?
regards mike