DDK - Die Deutschen Klassiker

I'm currently getting into my '79 SC targa and need some help (photos of NSF inner wing area) please.  I'm looking for the body shape from above the bumper bracket to the top on the wing, and the area around the hole through which the petrol pipe goes.



For those who've not seen my resto thread, here's why .......the NSF inner wing had a small amount of rust around the seriously modified bumper mount





It turned out that the panel underneath had been modified, with a number of patches just widely lapped over the original metal.  Due to the shape, the replacement bumper bracket would not fit.  So, shortly later, it looked like this ..





Anyway, I added a plate to take the bumper bracket (sorry about the camera shake)





I've patched in below this panel, trying to ensure that muck will not sit and rust, but am interested in any photographs showing how the panel should be above what I've done so far.



Then, there is another patch, just lap jointed with around an inch of overlap around the hole through which the petrol pipe goes.



By what I assume is the original fuel pipe hole (visible within the 'replacement' hole, the overlap is almost 2 inches and a great muck trap.  I intend to cut and replace this lapped panel, so does anyone have a good shot of what this area is supposed to look like please.



Thanks

Peter

There should be some pictures here that may help

http://www.classiccarreras.com/3.0SC%20 ... Bowls.html

Very useful, thanks
Peter

Jon, did you rescue that section, or is someone now making it (other than complete inner wings from Porsche)?

I hammer-form the area up, but it takes a lot of hitting! I'm finding these days that as fast as I can tool up and fabricate this stuff, someone muscles in and starts pressing them properly.

Barry,

Dansk sell their inner wings in four sections if you only need a part of it.

Regards
Jon

Does this help?

http://i1230.photobucket.com/albums/ee4 ... G_0096.jpg

Thanks Ian

DustyM wrote:Barry,

Dansk sell their inner wings in four sections if you only need a part of it.

Regards
Jon

Thanks Jon, looks like I'd better investigate ....

I've put some photos on my thread its just a little hole in the restoration section if they are any good for you.

Cheers