DDK - Die Deutschen Klassiker

Posted: **Wed May 10, 2017 9:38 pm**

Hi, I need a new oil breather hose (24mm ID) from my oil tank to the engine for my 914-6. I need about 900mm because of the routing, unfortunately 911 ones at standard 650mm are too short!
Can anyone help with a UK supplier for these hoses who can sell by the metre?

I tried Patrick Motorsport in USA. 1m of hose was $35 dollars- shipping was $111!

Many thanks

Posted: **Wed May 10, 2017 9:58 pm**

This any good Rob?

PET says the length is 800mm.

https://www.rosepassion.com/en/cat/pors ... ose/P77876

Posted: **Wed May 10, 2017 10:04 pm**

These guy's sell the Porsche cohline hoses in various sizes.

http://www.advancedfluidsolutions.co.uk ... -218-c.asp

Posted: **Thu May 11, 2017 9:47 am**

many thanks, for the fast response, very much appreciated

Posted: **Thu May 11, 2017 12:45 pm**

I went to my local motor factor who had 24mm ID heater hose on a roll. Does the job perfectly (the hose is under no pressure) and not expensive.

DDK - Die Deutschen Klassiker

24mm ID Oil Tank Breather hose- supplier needed

24mm ID Oil Tank Breather hose- supplier needed

Re: 24mm ID Oil Tank Breather hose- supplier needed

Re: 24mm ID Oil Tank Breather hose- supplier needed

Re: 24mm ID Oil Tank Breather hose- supplier needed

Re: 24mm ID Oil Tank Breather hose- supplier needed