Page 1 of 1
Joy
Posted: Thu May 04, 2017 7:11 am
by LouisCurtis
If you recognise what this is, you will know the joy I have been dealing with at the moment
Anyone else had this fun?
Sent from my iPhone using Tapatalk
Re: Joy
Posted: Thu May 04, 2017 8:19 am
by defianty
Is it the nasty, water absorbing, rust inducing foam filler in the rear wings above the indicators? If it is I share your pain.
Re: Joy
Posted: Thu May 04, 2017 9:16 am
by LouisCurtis
Yes Stephen, it certainly is. And it's bloody difficult to get to.
Thankfully there was no rust back there which was a relief!
Re: Joy
Posted: Thu May 04, 2017 9:46 am
by defianty
LouisCurtis wrote:Yes Stephen, it certainly is. And it's bloody difficult to get to.
Thankfully there was no rust back there which was a relief!
Unlike mine then
Re: Joy
Posted: Thu May 04, 2017 11:40 am
by Mike Smith
Louis,
Somewhere amongst your dads paperwork there is an Official Porsche Document listing all the places that a customer can expect water ingress into his new 914
Just part of the Rich Pattern that is Porsche ownership
Re: Joy
Posted: Thu May 04, 2017 9:33 pm
by LouisCurtis
Just the luck of the draw I guess Stephen.
Thanks Mike, yes I have seen the document but will have another look at it.
Does anyone have a suggestion of anything to put in the void at the back of the fender. It's going to get the same underseal treatment as the rest of the pan etc but wondered if there was a suitable alternative for the foam. . It just seems like such a dirt trap and very difficult to clean out when in use.
