Early Seat Belt Anchors
Posted: Thu Sep 22, 2016 4:35 pm
Many early bodyshells have seat belt anchors that are either corroded or damaged and would benefit from being replaced.
We have a number of projects that have this problem.
We have reproduced the original anchor with a new part with identical characteristics to the original part.
Theses anchors were used from the '67 Model Year. The very early anchors were pressed from thin steel and had a nasty habit of failing.
We have used a medium carbon steel with similar hardness and hence strength to the original part.
It is tapped 7/16" UNF.
We can supply them as loose parts or TIG welded to a laser cut plate if required.
We have a number of projects that have this problem.
We have reproduced the original anchor with a new part with identical characteristics to the original part.
Theses anchors were used from the '67 Model Year. The very early anchors were pressed from thin steel and had a nasty habit of failing.
We have used a medium carbon steel with similar hardness and hence strength to the original part.
It is tapped 7/16" UNF.
We can supply them as loose parts or TIG welded to a laser cut plate if required.
