Page 1 of 1
Oil filter console
Posted: Fri Mar 04, 2016 4:37 pm
by Jesse
Can the oil filter console be fitted wrong on a -71 911T or is it (the 3 screws) offset hence only goes on one way?
Have tried looking in the workshop manual but didnt find anything on this matter..
Kind regards
Jesse
Re: Oil filter console
Posted: Fri Mar 04, 2016 4:48 pm
by Nick Moss
Just turn it round until the 3 screws line up, i don't remember there being an offset, so it should fit 3 ways
Re: Oil filter console
Posted: Fri Mar 04, 2016 5:12 pm
by Jesse
Thanks for your reply Nick!
How do I know which of the 3 ways is correct if it can be fitted all 3 ways?
Sorry if I am being unclear!
Regards
Re: Oil filter console
Posted: Fri Mar 04, 2016 7:45 pm
by Jesse
Is my question understandable or is everyone else but me enjoying a pint at this hour? =)
Hugely thankful for help!
Re: Oil filter console
Posted: Fri Mar 04, 2016 7:57 pm
by Lightweight_911
You need to line up the hole arrowed with the corresponding hole in the tank (usually at the bottom as seen in this picture):
