Pair Ridgard RS4 bucket seats ...
Posted: Sun Oct 11, 2015 5:14 pm
.
Just removed from my '59 Giulietta Sprint.
These are steel-framed but only weigh ~ 3.5kg (8 lbs) each & are a popular choice for Historic rally competitors.
Obviously the colour is not to everyone's taste but they could easily be dyed (for an example of how successful that can be see Sladey's thread in the Restoration section).
Very low miles & virtually as new.
Approx dimensions are:-
Seat height = 25.5 in
Seat height inc headrest = 32 in
Overall width at widest point = 20 in
They have 4 x M8 threaded holes on the underside (into the steel frame - hole centres are :-
13in apart front-to-back & 13.75in apart side-to-side
This model of seat is still available from Ridgard at over £400 ea
£350 pair - collection only - SOLD !!!
I also have these new tilting bases/sliders available separately which could be adapted to suit your application.
They are not Ridgard versions - & don't fit directly - but would provide a ready staring point to facilitate installation.
- the 2nd one just needs assembling (missing a few bolts which I don't seem to have):
£150 pr - only available with the above seats - SOLD !!!
Just removed from my '59 Giulietta Sprint.
These are steel-framed but only weigh ~ 3.5kg (8 lbs) each & are a popular choice for Historic rally competitors.
Obviously the colour is not to everyone's taste but they could easily be dyed (for an example of how successful that can be see Sladey's thread in the Restoration section).
Very low miles & virtually as new.
Approx dimensions are:-
Seat height = 25.5 in
Seat height inc headrest = 32 in
Overall width at widest point = 20 in
They have 4 x M8 threaded holes on the underside (into the steel frame - hole centres are :-
13in apart front-to-back & 13.75in apart side-to-side
This model of seat is still available from Ridgard at over £400 ea
£350 pair - collection only - SOLD !!!
I also have these new tilting bases/sliders available separately which could be adapted to suit your application.
They are not Ridgard versions - & don't fit directly - but would provide a ready staring point to facilitate installation.
- the 2nd one just needs assembling (missing a few bolts which I don't seem to have):
£150 pr - only available with the above seats - SOLD !!!