Page 1 of 1
Generator recondition
Posted: Thu Jul 16, 2015 8:10 am
by leewiffen
Looking for a company in the South, Surrey, Sussex to overhaul a Bosch generator....any ideas
Re: Generator recondition
Posted: Thu Jul 16, 2015 9:18 am
by nj1052
I have used these guys several times with good results. Based in Dorking.
http://www.jmorganandson.co.uk/index.html
Cheers
Re: Generator recondition
Posted: Thu Jul 16, 2015 7:28 pm
by Jonny Hart
Curds in Tunbridge Wells. Thorough and quick turn around.
Re: Generator recondition
Posted: Mon Jul 20, 2015 8:04 am
by neilbardsley
Rob at Broadway Electrics in Graves Essex. I've had two done and he does them for Max, PRS, Roger Bray etc.
Re: Generator recondition
Posted: Mon Jul 20, 2015 8:19 am
by MT
Me too. Excellent quality service experienced on this type of unit.
Mick
Re: Generator recondition
Posted: Wed Jul 29, 2015 10:28 pm
by leewiffen
Well moving swiftly along my experience now includes swopping the Dynamo with the knackered brushes for a re manufactured unit as well as an uprated voltage regulator. Now the generator light goes out but only around 2000 revs..... Does that sound like fan belt tension? The other issue is my handbrake light goes on and off intermittently....bad earth.....bad switch? Where is the handbrake light switch mounted?
I will now need to check the charging rate
Re: Generator recondition
Posted: Mon Sep 21, 2015 8:34 am
by leewiffen
OK, for those interested in this thread, I have resolved my charging problem. Despite fitting a new regulator and re-manufactured dynamo I still had no charge so I took both dynamos and regulators I had in my possession to J Morgan in Dorking to check over for me. ( Thanks Mick ) Both dynamos were buggered, even the re-manufactured, which according to Morgans had "thrown the solder" indicating it had been running too hot. Maybe it was the regulator....no they were both fine
In the meantime I had been looking at wiring diagrams, google images etc etc and realised the brown and the black wires going to the generator were transposed. BINGO, there was my problem, bought another re-manufactured dynamo, fitted the wires correctly and hey presto....wonderful charging
I must say it was satisfying, if somewhat expensive, solving this myself. One disappointment was that a marque specialist, despite having the car a number of weeks for a tune and general going over did not see those transposed wires and upon returning the car remarked, "Oh, by the way your red light is staying on, just change the dynamo and regulator that will solve the problem" !! Experts huh ?
Oh, by the way, Morgans were very helpful
Re: Generator recondition
Posted: Mon Sep 21, 2015 10:15 am
by Strictly
school of hard knocks, no better place to be. What youve spent in cash, you've gained in experience, and that will serve you well for the next time (i.e next project porsche). Well done, always satisfying to get it fixed yourself! =)