Page 1 of 4
it won't start
Posted: Thu Apr 14, 2005 12:08 pm
by Helen

thought i'd take it out for a jolly around the leicestershire countryside while the sun is out. but i can't get it to start.
i think the connection to the starter motor has come loose again but im not able to fix it
i really need to do a blondies course to maintaining a 912.. anyone know a good teacher??
Posted: Thu Apr 14, 2005 12:28 pm
by impmad2000
Have you tried sticking a charger on the battery for a while.... It gave mine the boost it needed to spin over like a top once more. May be worth a try.
Posted: Thu Apr 14, 2005 12:34 pm
by FraserMurray
Also maybe worth sticking your head under the dash to make sure one of the wires hasn't popped loose?
F
Posted: Thu Apr 14, 2005 12:35 pm
by Helen
battreys brand new and yes it is fully charged.
Posted: Thu Apr 14, 2005 12:39 pm
by Helen
i know whats wrong im just too girlie to fix it. scared i might make things worse by doing/touching the wrong thing.
sorry too many years driving a Boxster...............hasn't got an engine and dosn't seem to need one

Posted: Thu Apr 14, 2005 12:46 pm
by MdR
Helen wrote:too many years driving a Boxster...............hasn't got an engine and dosn't seem to need one

Or a soul
Helen, dive under the car & give the wires to the starter motor a wiggle. If nothing seems loose tap the big bit of the starter motor a couple of times with a small hammer & then see if it'll start.. If that doesn't work make sure it's out of gear & the ignition is off, try shorting the big wire on the starter solenoid across the little wire on the starter solenoid with a long screw driver, it may well spark a bit & make you jump. This should make the starter spin. If it does go back up top & try the key...
Posted: Thu Apr 14, 2005 1:14 pm
by impmad2000
Helen, dive under the car & give the wires to the starter motor a wiggle. If nothing seems loose tap the big bit of the starter motor a couple of times with a small hammer & then see if it'll start.. If that doesn't work make sure it's out of gear & the ignition is off, try shorting the big wire on the starter solenoid across the little wire on the starter solenoid with a long screw driver, it may well spark a bit & make you jump. This should make the starter spin. If it does go back up top & try the key...
I can show you round this if you'd like..... [/quote]
Posted: Thu Apr 14, 2005 1:15 pm
by Helen
MdR wrote:Helen wrote:too many years driving a Boxster...............hasn't got an engine and dosn't seem to need one

Or a soul
Helen, dive under the car & give the wires to the starter motor a wiggle. If nothing seems loose tap the big bit of the starter motor a couple of times with a small hammer & then see if it'll start.. If that doesn't work make sure it's out of gear & the ignition is off, try shorting the big wire on the starter solenoid across the little wire on the starter solenoid with a long screw driver, it may well spark a bit & make you jump. This should make the starter spin. If it does go back up top & try the key...

whats a starter motor look like?
i really wish i was kidding here. i bought the car with the idea of learning all this but Larrys enjoying it so much he won't let me near it and i admit i have encouraged him to do this.
im very willing to learn but,Larry is the worst teacher in the world.
Posted: Thu Apr 14, 2005 1:42 pm
by impmad2000
A starter motor ....

Posted: Thu Apr 14, 2005 2:26 pm
by Helen
WOW i reconnise that bit...now wheres my hammer

Posted: Thu Apr 14, 2005 2:30 pm
by MdR
O-kay.....
Don't feel disheartened it's not true that boys are genetically able to recognise car bits
The starter motor is bolted to the back end (back is back, as you sit in the car - the engine end in your 912) of the gearbox, up high on the right hand side/offside (right is right as you sit in the car).
The gearbox is the big metal lump attached to the road wheels by a couple of (drive)shafts, the starter is above and slightly behind the offside drive shaft. The engine is the big metal lump behind the gearbox.
Here's a bit of blurb that kinda helps.
http://www.pelicanparts.com/techarticle ... nstall.htm
and maybe this too
http://www.pelicanparts.com/techarticle ... r_diag.htm
Posted: Thu Apr 14, 2005 2:34 pm
by Helen
panic not fellas Larrys back from his travels tomorrow so im sure he will be able to sort it.
might have to yell for help if he can't

Posted: Thu Apr 14, 2005 2:40 pm
by MdR
Think yourself lucky, imagine trying to diagnose & fix a Cayenne... we'd need a ladder just to reach the underside of the drive-train.
Posted: Thu Apr 14, 2005 3:51 pm
by Helen
somehow i can't see the Cayenne lasting 38 years either

Posted: Fri Apr 15, 2005 7:10 pm
by Helen
UP DATE.
Larrys stumped so we are going to have to scream for help.
unfortunatly im not sure when we are going to next get the chance to spend time on it

. im not having a good day
