Page 1 of 1
order of work to refurbish fuchs
Posted: Sat Oct 18, 2014 9:17 am
by Flat 6
Have a set of '71 Fuchs on my '73 T. I will be going for the anodised finish on petals and satin painted inner.
I think this is a daft question but I presume the whole wheel is anodised and then you paint the inner surface?
Planning on using this process for painting:
http://www.themotoringjournal.com/featu ... -home.html
Just checking that the anodising process doesn't effect the surface to the extent that painting is more difficult?
Cheers,
Al.
Re: order of work to refurbish fuchs
Posted: Sat Oct 18, 2014 9:25 am
by Gary71
Yes, they are painted after anodising.
The correct refurbishment process for Fuchs is:
Remove from car
Send to Early 911
Flex credit card
Refit to car!
I went through all the DIY options for 10 years before finally admitting this is just one of those jobs that you get what you pay for.
Re: order of work to refurbish fuchs
Posted: Sat Oct 18, 2014 9:43 am
by sanjay
The correct refurbishment process for Fuchs is:
Remove from car
Send to Early 911
Flex credit card
Refit to car!
Brilliant ! and very sound advice
Sanjay
Re: order of work to refurbish fuchs
Posted: Sat Oct 18, 2014 9:50 am
by Nick Moss
Sorry, no credit cards accepted
Re: order of work to refurbish fuchs
Posted: Sat Oct 18, 2014 10:04 am
by sladey
The link you posted - he removes the anodising by stripping and sanding and then polishing and paints. So the wheels aren't anodised (also too shiny IMHO)
Re: order of work to refurbish fuchs
Posted: Sat Oct 18, 2014 10:38 am
by haasad
If you decide to DIY
Paint strip
Anodise strip (pro job only IMO)
Detail polish rim and petals
Re-anodise clear (pro job)
Mask and Re-paint
BUT with such good service from Nick and others and the associated confidence in the finish not sure I'd choose the DIY option.
Re: order of work to refurbish fuchs
Posted: Tue Oct 28, 2014 11:52 am
by Flat 6
Thanks to all for no doubt sound advice. A mix of stubbornness and stupidity means that I will give the DIY option a go on at least one wheel and see how it turns out.
Sladey, aware that those wheels aren't anodised on the link but thought his process for painting seemed sensible!
Will report back on results when completed.
Al.
Re: order of work to refurbish fuchs
Posted: Tue Oct 28, 2014 12:30 pm
by Gary71
His process is sound, I'd even gone as far down this route as to buy some enamel paint to give it a go on a spare (cracked!) Fuch.
...then I sent them to Nick
Re: order of work to refurbish fuchs
Posted: Tue Oct 28, 2014 12:34 pm
by Nige
My fuchs were polished when I acquired them and they soon dulled off. I had them polished up really nice by a pro but as expected with my minimal efforts at cleaning the car and running in all weathers they soon dulled off again. If I was to have them refurbed I would definitely get them anodised.