Fully restored 912 shell LWB
Posted: Thu Oct 09, 2014 6:15 pm
We have a '69 912 for sale. Its a complete car, stripped, bagged and boxed. Its LHD and came from the USA. Off the road since 1988.
We have restored the shell using our own rollover and Celette jigs. Its rust free and very straight. It wasn't in too bad a shape - we put in new kidney bowls, outer floor sections, inner/outer sills, A post & B post repairs, repairs under torsion bar, front suspension pan, a bit of rear parcel shelf. We rebuilt the bottoms of the A posts too.
The work has been done to our usual high standard. A lot of effort has gone into preventing future rust. I hope you can see that in these pictures.
https://www.dropbox.com/sh/0d9igjygarz3 ... 7cpEa?dl=0
Although we would prefer an order to finish the car the engine does not match so we're prepared to sell the shell. It would suit someone with an early 911 project who needs a set price for his welding.
The original colour was burgandy. We can finish the shell any colour and fit 911 engine mounts as required. Available as just a shell or with wings, bonnet, engine lid & bumpers.
Price range £12,000 to £15,000
We also have capacity now for bodyshell restoration, media blasting, painting, roll cage fitting etc.
(paid up advertiser waiting for new logo & banner ad to be produced)
We have restored the shell using our own rollover and Celette jigs. Its rust free and very straight. It wasn't in too bad a shape - we put in new kidney bowls, outer floor sections, inner/outer sills, A post & B post repairs, repairs under torsion bar, front suspension pan, a bit of rear parcel shelf. We rebuilt the bottoms of the A posts too.
The work has been done to our usual high standard. A lot of effort has gone into preventing future rust. I hope you can see that in these pictures.
https://www.dropbox.com/sh/0d9igjygarz3 ... 7cpEa?dl=0
Although we would prefer an order to finish the car the engine does not match so we're prepared to sell the shell. It would suit someone with an early 911 project who needs a set price for his welding.
The original colour was burgandy. We can finish the shell any colour and fit 911 engine mounts as required. Available as just a shell or with wings, bonnet, engine lid & bumpers.
Price range £12,000 to £15,000
We also have capacity now for bodyshell restoration, media blasting, painting, roll cage fitting etc.
(paid up advertiser waiting for new logo & banner ad to be produced)