Page 1 of 1
Trim piece needed please
Posted: Wed Aug 01, 2012 3:37 pm
by Del
Does anyone have a spare piece of 356 speedster waistline trim? (Not Beetle stuff).
I need the one like the stuff Roger Bray sells. Looks pretty much like this:
Only after a short length about 4-6 inches or so?
Not too fussed about condition as it will probably polish up, they are usually Aluminium.
Thanks in advance to anyone that can help.
Re: Trim piece needed please
Posted: Wed Aug 01, 2012 9:50 pm
by mdmax72
Will have a look, sure l bought some spare lengths?? Will have a dig in the garage over the weekend. Are you after the short pieces either side of the door handles if so have you got the filler pieces??
Re: Trim piece needed please
Posted: Wed Aug 01, 2012 10:41 pm
by Del
Thanks Rich, yes it is to make the short piece as the ones i have are the wrong size, and yes i have the filler pieces. Thanks for the reply and for having a look for us.
Re: Trim piece needed please
Posted: Sun Aug 05, 2012 6:09 pm
by mdmax72
Del
had a quick look in the usual places but to no avail. Defo got some mine were to short that's why l had a few spare lengths, just finding the bloody things. Will keep looking anyway. If your in a rush for them you could chop an inch of the rear spears, if you defo got the fillers, nobody would no unless they got a tape out

Re: Trim piece needed please
Posted: Tue Aug 07, 2012 10:02 am
by Del
Thanks for looking... It's not urgent in that it wont stop the car from driving. I know what you mean about nicking a bit of the rears but we got too eager and fitted those first and put holes right at the ends for a snug fit where it curves so they cant be trimmed now.
Would be really great if you do manage to find a piece anyway!