DDK - Die Deutschen Klassiker

Updates for the Christmas period and 2012. Over the Christmas period i will be producing a few video's to show the products in more detail including fitting to one of my cars . Watch the site for more info

Harness mounts - Over 18 pairs sold !! - out of stock - next run Jan 16th $190us pair shipped
Strut brace brackets inc hardware - 2 sets left of the 2nd run $110us pair shipped
Twin coil weld on mounts - 1 left of the 2nd run $45us each shipped - next run jan 16th
Cibie hood light mounting plates $45us pair shipped

Reproduction LWT recaro legs (retofit ) for std sliders - due 16th jan - $99us pair
Reproduction LWT recaro seat mounts / brackets - due 16th jan by order - due to varying sizing / spacing of the seats we will be making the recaro 405mm std and custom sizing to match your seats.

www.st-classic.com

Hi,
Do you think you could fabricate crossbars to suit a 74 shell?
See this thread- http://www.ddk-online.com/phpBB2/viewto ... =9&t=37103

Regards,

brembo wrote:Hi,
Do you think you could fabricate crossbars to suit a 74 shell?
See this thread- http://www.ddk-online.com/phpBB2/viewto ... =9&t=37103

Regards,

with the double seat mount sticking out on both sides for the 74+ there is not enough room to intall and mount the seat lower . On one of my later back dates i will be removing the tunnel mounting lip and then using the std bracket

following products back in stock;

Harness mounts - Over 25 pairs sold !! - $190us pair shipped
Strut brace brackets inc hardware - $110us pair shipped
Twin coil weld on mounts - $45us each shipped -
Cibie hood light mounting plates $45us pair shipped

Updates

All items made to date in stock

new for July

- bolt on cover plates for the engine compartment heater duct ( to keep out the dust and moisture when running headers)
- reproduction sport purposes oil breather tank kit - complete kit for a plug and play install with a modern twist

advtracing wrote:following products back in stock;
Cibie hood light mounting plates $45us pair shipped

Did you receive my payment?
Regards,
Hu.

hukent wrote:

advtracing wrote:following products back in stock;
Cibie hood light mounting plates $45us pair shipped

Did you receive my payment?
Regards,
Hu.

Hello, yes all done and posted . Should be there is approx 10 days . Thanks