Page 1 of 1
backdate on ebay
Posted: Sun Dec 04, 2011 2:01 pm
by PSut
nothing to do with me, spotted this and thought you guys might be interested
http://www.ebay.co.uk/itm/porsche-911-/ ... 1e68e1e3cf
Re: backdate on ebay
Posted: Sun Dec 04, 2011 2:04 pm
by PSut
Re: backdate on ebay
Posted: Sun Dec 04, 2011 2:39 pm
by hot66
2nd one is a DDK car
Re: backdate on ebay
Posted: Sun Dec 04, 2011 2:59 pm
by barryb
Hi
I want mine "corner waighted" whatever that is. I like the bonnet stay.
Barry
Re: backdate on ebay
Posted: Sun Dec 04, 2011 5:09 pm
by Nige
First one was an IB'ers car, though bumpers have since been backdated.
Re: backdate on ebay
Posted: Sun Dec 04, 2011 6:04 pm
by squirdan
Ride height looks about right for safari rally!
Re: backdate on ebay
Posted: Sun Dec 04, 2011 6:25 pm
by barryb
Hi
Sorry to hijack this thread but the mention of ride height promted me to ask the question.
What do you think a ground to wheel arch F & R measurement should be for standard steet use. I keep thinking mine looks starnge with its nose up attitude. I know the real way of doing it is to measure as per workshop manual but was just after a quick check. Do you think the sill being horizontal is a good way to check attitude.
Barry
Re: backdate on ebay
Posted: Sun Dec 04, 2011 6:46 pm
by hot66
car should have about a degree of forward rake measured on the sill , which from memory means the rear arch height should be around 1/2" less than the front arch height
ride heights .... everyone has there own opinion on this. from memory my car is set at 25 at the front & 24.5 rear....... but wheel arch height is not the best way to acuratly check as body work tolerances can be huge
Re: backdate on ebay
Posted: Sun Dec 04, 2011 7:29 pm
by Mick Cliff
hot66 wrote:2nd one is a DDK car
And it's a cracker!
Re: backdate on ebay
Posted: Tue Dec 06, 2011 10:15 pm
by 911ts3
Thanks Mick !
Steve
911ts3