73RS Lightweight Door Panels - Pictures please
Moderators: hot66, impmad2000, Barry, Viv_Surby, Derek, Mike Usiskin
-
- Put a fork in me, I'm done!
- Posts: 1519
- Joined: Thu Oct 06, 2005 8:34 pm
- Location: Warwickshire
73RS Lightweight Door Panels - Pictures please
Can anyone post a detailed set of pictures of the RS Lightweight Door Panels.
I want to note in particular the positions of the fixings etc. for when I refit mine over the winter. I have purchased a set from Southbound including the pull and Fiat 500 handle etc.
I also need to get a set of the membranes that go on the door first - £££ from Porsche so does anyone know of an alterntive supplier or material that can be used ?
Ian
I want to note in particular the positions of the fixings etc. for when I refit mine over the winter. I have purchased a set from Southbound including the pull and Fiat 500 handle etc.
I also need to get a set of the membranes that go on the door first - £££ from Porsche so does anyone know of an alterntive supplier or material that can be used ?
Ian
Ian Highfield
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
-
- Nurse, I think I need some assistance
- Posts: 5115
- Joined: Wed May 25, 2005 12:39 pm
- Location: Hampshire
my old car's interior with said door panel. The backing board from Southbound will have the cut outs already marked depending on model and Dave should also have the plastic waterproofing material. Failing that any thin sticky backed plastic membrane should do.
![Image](http://i7.photobucket.com/albums/y256/Mike_Moore/doorpanel.jpg)
![Image](http://i7.photobucket.com/albums/y256/Mike_Moore/doorpanel.jpg)
cheers, Mike.
previously..
1994 968 Club Sport Riviera Blue
1994 993 C2 Carrera Riviera Blue
1972 911S to Martini RSR Prototype Spec
1973 911E to RS Lightweight Specification
1981 924 Carrera GT ex Mexborough car
3.2 Carrera Sport x2
previously..
1994 968 Club Sport Riviera Blue
1994 993 C2 Carrera Riviera Blue
1972 911S to Martini RSR Prototype Spec
1973 911E to RS Lightweight Specification
1981 924 Carrera GT ex Mexborough car
3.2 Carrera Sport x2
-
- Put a fork in me, I'm done!
- Posts: 1519
- Joined: Thu Oct 06, 2005 8:34 pm
- Location: Warwickshire
Unfortunately Dave said that they had not been able to get hold of the backing mambrane material lately, but the Porsche items are about £25 each he said ![Sad :-(](./images/smilies/icon_sad.gif)
Do you have any more detailed shots of the dash, doors, rear three quarters from your old car - e-mail to me if you have good high res - please.
I want to get them 'right'.
Ian
![Sad :-(](./images/smilies/icon_sad.gif)
Do you have any more detailed shots of the dash, doors, rear three quarters from your old car - e-mail to me if you have good high res - please.
I want to get them 'right'.
Ian
Ian Highfield
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
-
- DDK 1st, 2nd and 3rd for me!
- Posts: 2248
- Joined: Mon May 24, 2004 10:54 pm
- Location: london/surrey
Ian
see this thread as I asked the same question a couple of years back for my car
http://www.ddk-online.com/phpBB2/viewto ... highlight=
regards
Jonathan
see this thread as I asked the same question a couple of years back for my car
http://www.ddk-online.com/phpBB2/viewto ... highlight=
regards
Jonathan
1974 2.7 Carrera
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
(full restoration. now as an RS Touring)
1963 3.8 E Type
( 11 years in the making…………………….)
1952. XK120…the next one ……….……..)
Mike wrote:my old car's interior with said door panel. The backing board from Southbound will have the cut outs already marked depending on model and Dave should also have the plastic waterproofing material. Failing that any thin sticky backed plastic membrane should do.
Please could you tell me what make/model those seats are and if possible where I might be able to buy a pair
Thanks
Steve
-
- DDK forever
- Posts: 652
- Joined: Wed May 19, 2004 8:44 pm
- Location: Northants
- Contact:
Check that price from Porsche. I have the genuine membranes on my cars and they are great - and re-usable.
RG #466 - Ferdinand Magazine Porsche Blog
Ian
Genuine membranes available from www.mbscarparts.com
Jeremy (Tripe) on impactbumpers.
I paid £30 for a pair last year.
Genuine membranes available from www.mbscarparts.com
Jeremy (Tripe) on impactbumpers.
I paid £30 for a pair last year.
1974 911 Carrera 2.7 MFI LHD (sold)
1991 Audi Coupe 2.3 20V
1991 Audi Coupe 2.3 20V
I'm not sure if this is were where mIke got his from, but I gather these are really good reps :sng45 wrote:Mike wrote:my old car's interior with said door panel. The backing board from Southbound will have the cut outs already marked depending on model and Dave should also have the plastic waterproofing material. Failing that any thin sticky backed plastic membrane should do.
Please could you tell me what make/model those seats are and if possible where I might be able to buy a pair
Thanks
Steve
http://www.rsl-classic.de/pages_en/clas ... seats.html
James
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast![Wink ;)](./images/smilies/icon_wink.gif)
1973 911 2.4S
1993 964 C2
2010 987 Spyder
1973 MGB Roadster
Its not how fast you go, but how you go fast
![Wink ;)](./images/smilies/icon_wink.gif)
-
- Put a fork in me, I'm done!
- Posts: 1519
- Joined: Thu Oct 06, 2005 8:34 pm
- Location: Warwickshire
I will check the OPC price and contact Tripe.
Thanks,
Ian
Thanks,
Ian
Ian Highfield
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
-
- Put a fork in me, I'm done!
- Posts: 1519
- Joined: Thu Oct 06, 2005 8:34 pm
- Location: Warwickshire
Thanks Guy - will investigate shipping costs as well.
Ian
Ian
Ian Highfield
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
-
- Nurse, I think I need some assistance
- Posts: 8059
- Joined: Sat Feb 28, 2004 12:28 am
- Location: Scotland
_____________________________
73 RS (Sold)
67 S
Mint T (Sold)
996 Turbo (Sold)
73 2.4E (home after 25 years) and Sold again
73T targa (signal yellow project)
1953 Vauxhall Velox
914/6
1963 356B
https://www.mybespokeroom.com/
73 RS (Sold)
67 S
Mint T (Sold)
996 Turbo (Sold)
73 2.4E (home after 25 years) and Sold again
![Sad :-(](./images/smilies/icon_sad.gif)
73T targa (signal yellow project)
1953 Vauxhall Velox
914/6
1963 356B
https://www.mybespokeroom.com/
-
- Put a fork in me, I'm done!
- Posts: 1519
- Joined: Thu Oct 06, 2005 8:34 pm
- Location: Warwickshire
Door panel kit already ordered from Southbound.
Membranes ordered from Appbiz (super helpful chap there - Bob) as Tripe didn't ahve any and Porsche are £25 each.
Appbiz are $7 plus $12 shipping equates to £11 for a set.
Ian
Membranes ordered from Appbiz (super helpful chap there - Bob) as Tripe didn't ahve any and Porsche are £25 each.
Appbiz are $7 plus $12 shipping equates to £11 for a set.
Ian
Ian Highfield
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD
Pre 73 1964 Alfa Giulia Sprint GT MSA Category 1 Rally Car
1992 964 C2 with RS Suspension setup and Sport Interior - SOLD
1973 911T (2.7 Carrera engine and loads of period mods - all steel) - SOLD
1986 Carrera Coupe (256bhp) - SOLD