356 Parts for sale
Posted: Sat Nov 08, 2008 4:49 pm
I have accumulated some parts that I realise I don't really need now and maybe someone is interested in them.
As follows:-
1. LH door for a B but could be used on an A or even a C if you are'nt too picky about the pressings in the door bottom. It's in an excellent condition with the original door bottom and skin. I've had it grit blasted on the inside and stripped the paint from the outside. It really is the best door I've come across although there are still some minor bulges/dents to sort out.
Unfortunately I can't use it on my A project because the fit is not right - no problem if you are replacing the door post or the f.wing.
On reflection is was a bit much to expect it to fit my own car.
2. RHD dash for a B in excellent condition.
3. Flywheel for A/B. Presently at machine shop having chamfer to remove tooth burrs and also having seal OD machined and polished.
4. Pair of double flapper boxes which have been refurbished. They have been grit blasted and re-painted. Both have had v.minor repairs and one is missing the rubber seal on the flap valve but I don't believe this is too important since there is a second flap valve on the heater pipe.
JF
As follows:-
1. LH door for a B but could be used on an A or even a C if you are'nt too picky about the pressings in the door bottom. It's in an excellent condition with the original door bottom and skin. I've had it grit blasted on the inside and stripped the paint from the outside. It really is the best door I've come across although there are still some minor bulges/dents to sort out.
Unfortunately I can't use it on my A project because the fit is not right - no problem if you are replacing the door post or the f.wing.
On reflection is was a bit much to expect it to fit my own car.
2. RHD dash for a B in excellent condition.
3. Flywheel for A/B. Presently at machine shop having chamfer to remove tooth burrs and also having seal OD machined and polished.
4. Pair of double flapper boxes which have been refurbished. They have been grit blasted and re-painted. Both have had v.minor repairs and one is missing the rubber seal on the flap valve but I don't believe this is too important since there is a second flap valve on the heater pipe.
JF