Page 1 of 1
MFI Cold start and microswitch
Posted: Wed May 07, 2008 12:41 pm
by 2.4TE
I had my share of fun and games with these items over the last few weeks, but finally solved the problems. Thanks to all here who helped (esp. Tim and Andy), also Grady Clay on Pelican. A detailed account for those interested is here:
http://forums.pelicanparts.com/showthread.php?t=403260
Posted: Wed May 07, 2008 12:48 pm
by impmad2000
Well done Dave. Good result, and I'm surre you've learned a bit too
Cheers
Tim
Posted: Wed May 07, 2008 1:03 pm
by hot66
great thread there
One day I might get around to checking my speed switch
Posted: Wed May 07, 2008 9:50 pm
by 210bhp
Dr Dave
I am really really sorry I missed the thread on pelican after my first reply. It seems to have gone under my radar. Anyway I have read the whole thing now and saved it to my MFI file.
Looks like you got the same satisfaction that I did working through the switch related problem. I think it good to share these things. You have documented the process very nicely in the thread.
I too could not have done the process without the help of Andy and Tim so again a big thank you to them.
Keep sharing on this forum (good bad or ugly). That's why DDK is so good!!!
Regards
Mike
Posted: Thu May 08, 2008 8:28 am
by 2.4TE
No worries Mike. Yes Tim, I learned a lot, not least that patience really is a virtue!