Page 1 of 1
Screws
Posted: Thu Jan 03, 2008 9:23 pm
by 1972_911t
Need the 4 screws that hold the cowling to the steering colomb behind the steering wheel and also the two that hold the horn electrical conector disk on. Also need one of the screws that holds the switch onto the back of ignition barrel, the screws that hold the glove box door on and the allen screw that clamps the ignition lock to the coloum.
Steve
Posted: Thu Jan 03, 2008 10:04 pm
by Lightweight_911
Steve - the 4 screws that hold the plastic 'clamshells' to the steering column & those that secure the horn contact ring (2) are the same:
M4 x 10mm cheese-head machine screws
- there are also 2 machine screws at the the sides of the 'clamshells' that help to clamp the 2 halves together - they are:
M3 x 10mm cheese-head (they go in horizontally at either side)
Screws
Posted: Fri Jan 04, 2008 8:38 am
by butzsi
Steve, if you have difficulty obtaining any screws/bolts/nuts etc try these people :
www.nu-screwandnut.co.uk 020 8452 8631 , they hold vast stocks.
Regards.......Chris