1969 MFI Throttles (SOLD)
Posted: Fri Aug 17, 2007 1:56 pm
I have a set of 1969E MFI Throttle Bodies and mag stacks that have been bored out for a large displacement MFI engine. The throttles have been bored at the Bottom to 39mm to match large port SC Heads and 42mm at the top and fitted with a 42mm throttle plate. The intake stacks are bored at 42mm straight through. Some of the bushes have also been replaced on the ones that were worn. All the throttle shafts, arms, air screws/springs have been re-plated.
Asking £600
Asking £600